Worcestershire · England
Bath Re-enamelling for Crown East homes
We travel to Crown East for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Repairing versus replacing in Crown East
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Same prices wherever you are
- One-year guarantee on every repair
- Rooms protected and left tidy
- Straight answers about what a repair can do
Read our full price list and guide to resurfacing and replacement costs.
About our bath re-enamelling in Crown East
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on cast iron baths, acrylic baths and pressed steel baths, and people most frequently call us about brown or grey marks that don’t clean off and an old resurfacing that’s failing.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Location
- Crown East (WR2)
- Area hub
- Worcestershire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Simple care helps the repair last. We recommend:
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Crown East and nearby
Crown East is about 3 miles west of Worcester, in Worcestershire. Customers in Crown East get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Our technicians cover all 376 towns and villages in Worcestershire. We work right across the region, from Crown East to Birmingham (about 25 miles away).
Here we cover the WR2 postcode area. We also cover the places around Crown East: Broadmore Green (1 mile south), Rushwick (1 mile south-east), Dines Green (1 mile east), Upper Wick (1 mile south-east) and Henwick (2 miles east). Larger places within reach include Worcester (3 miles east), Kidderminster (14 miles north), Bromsgrove (13 miles north-east), Great Malvern (5 miles south), Droitwich Spa (7 miles north-east) and Stourport-on-Severn (10 miles north).
Near you in Crown East
Around Crown East, we work in homes near Christopher Whitehead Language College, The Plough pub and Church of St Thomas, among other places. The nearest railway station is Worcester Foregate Street station, roughly 2.3 miles east. Well-known places in the area include Powick Hospital (2.6 miles south) and CrownGate Shopping Centre (2.2 miles east). The countryside around Crown East includes Ankerdine Hill.
Towns and villages near Crown East
Other services in Crown East
What happens on the day
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. Allow a full day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
How to get a price
Email us photos of the damage and a wider shot of the whole item, with your WR2 postcode, and we’ll reply with a fixed price.
Related advice
Questions from Crown East
What areas do you cover?
Everywhere in the UK, Crown East included. There is no extra charge for travel.
How do I book?
Use the quote form or ring 0345 017 0787.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What we cannot put right
It helps to know what we cannot do:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Crown East
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Prices and what affects them
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- How much damage there is
- The material
- What kind of damage it is
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Crown East. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
Two or three clear pictures are usually enough. Try to include:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- A clear, close picture of the problem area
- A wider photo showing the whole bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Landlord and trade work in Crown East
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
