Worcestershire · England
Bath re-enamelling & resurfacing in St John's, Worcestershire
Local bath re-enamelling for St John's: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
When a repair is not the answer
To be straight with you, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- A bath that is rusted through
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Bath re-enamelling in St John's without replacing anything
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for several chips and rust patches and a roll-top that’s seen better days, in basins & shower trays, pressed steel baths and acrylic baths.
Every repair comes with our one-year guarantee.
- Where
- St John's (WR2, WR5)
- Area hub
- Worcestershire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in St John's?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Clients typically contact us about:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- Chips and rust in more than one place
- Worn patches where water runs and sits
What your quote should include
- Who will actually do the work
- How changes to the job are handled
- What preparation is included
- Whether the price covers travel
What bath re-enamelling costs
Prices start from £350. You will know the full cost before booking. We look at:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Access to the area
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
The better the pictures, the more accurate the price. Here’s what helps:
- Natural light rather than flash
- One picture of the whole bath
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
To get a price, send a couple of photos through our quote form or call us. We will say right away if a repair is the right fix.
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
Why St John's customers choose us
- Fixed prices from your pictures
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- Same prices wherever you are
Take a look at our prices page or resurfacing vs replacement cost guide.
St John's questions
What areas do you cover?
Across the UK, so St John's is covered. Our prices are the same everywhere.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How do I get a price for bath re-enamelling in St John's?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
St John's and the surrounding area
St John's is about 2 miles south-west of Worcester, in Worcestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 376 places across Worcestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 25 miles away.
All of WR2 and WR5 is within our area. That includes homes on The Avenue, Foley Road and Jasper Road and the roads around them. If you are just outside St John's, we cover Lower Wick (1 mile south), Upper Wick (1 mile west), Diglis (1 mile east), Rushwick (1 mile west) and Dines Green (1 mile north-west). Larger places within reach include Redditch (15 miles north-east), Kidderminster (14 miles north), Bromsgrove (13 miles north-east), Great Malvern (5 miles south-west), Droitwich Spa (7 miles north-east) and Evesham (14 miles south-east).
Local landmarks in St John's
In St John's, that means homes near Pitmaston Primary School, Christopher Whitehead Language College and Gheluvelt Park, among other places. Other local landmarks include Brunswick Arms (under half a mile north), The King's School (1 mile north-east) and Church of St John (0.6 miles north). The nearest railway station is Worcester Foregate Street station, about 1.3 miles north-east. Further afield, we also cover the area around Museum of Royal Worcester (1 mile north-east) and CrownGate Shopping Centre (1.1 miles north-east).
Nearby places to St John's
What else we do in St John's
How to look after the repair
Simple care helps the repair last. We recommend:
- Respect the curing time we give you
- Get any chip repaired quickly
- Fix dripping taps quickly
- Store bottles off the bath
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow most of the day. Before we go, we will explain when it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
