Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Crowton, Cheshire West and Chester
Bath re-enamelling across Crowton and nearby, usually in one visit.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
What we cannot put right
A repair isn’t right for every job, including:
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Bath re-enamelling in Crowton without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s an old resurfacing that’s failing and brown or grey marks that don’t clean off, we can help, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Crowton (CW8)
- County
- Cheshire West and Chester
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Do you need bath re-enamelling in Crowton?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Most people contact us when they notice something like this:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- Several chips and rust patches
- A dull, rough surface that will not come clean
Questions to ask before booking
- Aftercare advice
- When it can be used again
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
More services for Crowton
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Questions from Crowton
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Do you come to Crowton?
Yes, we do. We send a technician to Crowton for every job, with no extra charge for travel.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
About Crowton
Crowton is about 5 miles west of Northwich, in Cheshire West and Chester. From the centre of Crowton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 224 towns and villages in Cheshire West and Chester. Our jobs stretch from Crowton to Liverpool (about 15 miles away).
Every address in CW8 is covered, from the main roads to the quietest streets. Jobs here include addresses on Poplar Vale, Ainsworth Lane and Kingsley Road and the roads around them. We also cover the places around Crowton: Onston (1 mile south-east), Ruloe (1 mile south), Acton Bridge (1 mile east), Norley (2 miles south-west) and Kingsley (2 miles west). Further out, we also cover Chester (12 miles south-west), Ellesmere Port (12 miles west), Winsford (7 miles south-east), Northwich (5 miles east), Boughton (12 miles south-west) and Frodsham (4 miles north-west).
What’s near Crowton
Our clients here include homes close to Weaverham High School, Warburton's Wood Nature Reserve and Crowton Christ Church CofE Primary School. Crowton’s nearest station is Acton Bridge station, roughly 1.3 miles east. Nearby you’ll also find Crossley Hospital West (3.2 miles west) and Kingsley Castle (2.9 miles west). Open spaces near Crowton include Dutton Park Farm Nature Reserve.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before booking.
Why book with us
- Colour-matched on site
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- A year’s guarantee on all work
Take a look at our pricing or bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. We do not charge extra for travel to Crowton. The price depends on:
- The colour and finish to match
- What the surface is made of
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- The material, if you know it
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
Most customers in Crowton get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Work for landlords and builders
Landlords, letting agents and housing providers in Crowton use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For anyone letting property in or around Crowton, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
