Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Kingsley, Cheshire West and Chester
Bath re-enamelling across Kingsley and nearby, normally in one visit.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
Kingsley questions
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover the whole of Cheshire West and Chester?
The entire UK, including all of Cheshire West and Chester. Just include your postcode and we will offer you dates.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Do you work in Kingsley?
Yes. We work across the UK and travel to Kingsley and the rest of Cheshire West and Chester. Send us pictures for a fixed quote, or call 0345 017 0787.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How we handle bath re-enamelling in Kingsley
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. If you’re dealing with a peeling or bubbling previous coating and a period or roll-top bath worth keeping, we can usually put it right.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Kingsley (WA6)
- County
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Kingsley
We’re used to working with agents and managing companies. Send the address, photos and access details.
We work for landlords, letting agents and housing providers in Kingsley as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A bath that is rusted through
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Common problems we fix in Kingsley
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
Keep an eye out for these signs:
- Staining under the taps and around the waste
- Lots of chips and rust spots
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
Before you book anyone
- Who will actually do the work
- How long it needs to cure
- How to look after the finish
- How changes to the job are handled
About Kingsley
Kingsley is about 5 miles south of Runcorn, in Cheshire West and Chester. Across the WA6 area, a technician comes to you. Our technicians cover all 224 towns and villages across Cheshire West and Chester. You can also see our page for Liverpool, about 14 miles away.
All of WA6 is within our area. From Hunters Hill, Dodgsley Drive and Beech View Road or a nearby road, we can come to you. Other places close to Kingsley include Hatchmere (1 mile south), Norley (2 miles south-east), Crowton (2 miles east), Ruloe (2 miles east) and Onston (3 miles east). Further out, we also cover Chester (10 miles south-west), Ellesmere Port (10 miles west), Winsford (8 miles south-east), Northwich (6 miles east), Boughton (10 miles south-west) and Frodsham (3 miles north-west).
Around Kingsley
Locally, our jobs take us to homes close to Warburton's Wood Nature Reserve, Kingsley St John's CofE (VA) Primary School and The Hurst Methodist Church. The nearest railway station is Delamere station, about 2.5 miles south. Nearby you will also find Crossley Hospital West (1.5 miles south-west) and Kingsley Castle (1.2 miles south-west). Not far away are Dutton Park Farm Nature Reserve.
How it works
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
Ask for a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
More services for Kingsley
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Get any chip repaired quickly
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs immediately
- Store bottles off the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
What affects the price in Kingsley
Resurfacing from £350. We charge the same across the UK, including Kingsley. The price reflects:
- Previous DIY repairs that have to come out
- Access to the area
- The colour and finish to match
- How much damage there is
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Any details about the material
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Any earlier repairs or coatings
Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Kingsley, and we will reply with a fixed quote.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
