Herefordshire · England
Bath Re-enamelling in Crumpton Hill
Bath re-enamelling in and around Crumpton Hill: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
About our bath re-enamelling in Crumpton Hill
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. Common call-outs are for several chips and rust patches and brown or grey marks that don’t clean off, in Victorian roll-tops, basins & shower trays and pressed steel baths.
Every job is backed for twelve months in Crumpton Hill and everywhere else. If something goes wrong with the work, we come back.
- Where
- Crumpton Hill (WR13)
- County
- Herefordshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take most of the day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Ensure the room can be ventilated
- Clear the area around the damage
- Let us know about parking or access
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Related advice
Questions from Crumpton Hill
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Crumpton Hill.
How long is the bath unusable?
One day for most baths, ready the following day. We give you timings with the quote.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you redo someone else’s repair?
Generally, yes. The old repair comes out first, so let us know about it.
Do you cover Crumpton Hill?
Yes. We work across the UK and travel to Crumpton Hill and the rest of Herefordshire. Send photos and we will quote, or call 0345 017 0787.
Crumpton Hill and the surrounding area
Crumpton Hill is about 2 miles north-west of Great Malvern, in Herefordshire. Wherever you are in the WR13 postcode area, we carry out the work at your property. Our technicians cover 255 places in Herefordshire. You can also see our page for Birmingham, about 30 miles away.
All of WR13 is covered, from the main roads to the quietest streets. If you are just outside Crumpton Hill, we cover Halfkey (1 mile east), North Malvern (1 mile south-east), Link Top (2 miles south-east), Leigh Sinton (2 miles north-east) and West Malvern (2 miles south). We also work in nearby towns such as Ledbury (8 miles south-west), Tupsley (15 miles west), Bromyard (8 miles north-west) and Colwall Stone (4 miles south).
What’s near Crumpton Hill
Typical jobs here are in homes near Dyson Perrins CofE Academy, Northleigh CofE Primary School and Church of St John the Evangelist, among other places. The nearest railway station is Malvern Link station, about 1.7 miles south-east of the centre. Further afield, we also cover the area around Cop Castle (5 miles north-west) and Powick Hospital (3.9 miles east). Not far away are End Hill.
Towns and villages near Crumpton Hill
More services for Crumpton Hill
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What affects the price in Crumpton Hill
Resurfacing from £350. There is no area surcharge for Crumpton Hill. The price reflects:
- How many items we do on one visit
- Unusual colours or finishes
- Access to the area
- The type of damage
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Herefordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Common problems we fix in Crumpton Hill
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is normally perfectly sound.
Look out for these signs:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A roll-top that is seen better days
Comparing quotes
- What protection goes down before work starts
- Who turns up on the day
- How soon you can use it again
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
