Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Cuddington, Cheshire West and Chester
Fixed-price bath re-enamelling in Cuddington and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
Bath re-enamelling in Cuddington, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with a roll-top that’s seen better days and enamel that’s lost its shine and feels rough, we can help, on acrylic baths, pressed steel baths and cast iron baths alike.
Every repair is covered by a one-year guarantee.
- Where
- Cuddington (CW8)
- Area hub
- Cheshire West and Chester
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Cuddington
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Keep an eye out for these signs:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- Lots of chips and rust spots
- An old resurfacing that’s failing
What your quote should include
- What the guarantee covers, and for how long
- Whether they match the colour on site
- What preparation is included
- Is the price fixed, and does it include VAT?
Other services in Cuddington
Your questions about bath re-enamelling in Cuddington
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
What areas do you cover?
The entire UK, including all of Cheshire West and Chester. Just include your postcode and we’ll offer you dates.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What happens next?
You’ll get a fixed quote back, plus dates. There is no obligation to book.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How to look after the repair
How the surface is treated afterwards matters:
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Cuddington. The price depends on:
- Any earlier repairs that need removing first
- The material
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- Any details about the material
- Your postcode, so we can check dates
Most clients in Cuddington get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
About Cuddington
Cuddington is about 4 miles west of Northwich, in Cheshire West and Chester. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Cuddington is one of 224 places in Cheshire West and Chester where we work. You can also see our page for Liverpool, about 18 miles away.
Our visits in CW8 work the same way as everywhere else we cover. Whether you live on Park Crescent, Millgate and Primrose Hill or anywhere nearby, a technician can come to you. Other places close to Cuddington include Stonyford (1 mile west), Ruloe (1 mile north-west), Onston (2 miles north), Norley (2 miles west) and Oakmere (2 miles south-west). Within a short drive, we also cover Chester (12 miles west), Ellesmere Port (13 miles west), Winsford (5 miles south-east), Northwich (4 miles east), Boughton (12 miles west) and Frodsham (6 miles north-west).
Local landmarks in Cuddington
Locally, our jobs take us to homes close to St John the Evangelist's Church, Sandiway Primary School and Abbotts Moss Nature Reserve, among other places. Cuddington has its own railway station: Cuddington station. Nearby you’ll also find Kingsley Castle (4.1 miles west) and Northwich Infirmary (3.8 miles north-east). For a walk, there is Neumann's Flash and Dutton Park Farm Nature Reserve.
When a repair isn’t the answer
It helps to know what we cannot do too:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
How to get a price
If you’re in Cuddington and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Landlords, agents and businesses in Cuddington
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
