Dumfries and Galloway · Scotland
Bath re-enamelling & resurfacing in Cummertrees, Dumfries and Galloway
We travel to Cummertrees for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Any details about the material
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Natural light rather than flash
If you’re in Cummertrees and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Bath re-enamelling in Cummertrees, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s wear marks under the taps and lots of chips and rust spots, we can help.
You get a one-year guarantee, the same in Cummertrees as everywhere else we work.
- Where
- Cummertrees (DG12)
- Region
- Dumfries and Galloway
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Cummertrees
Do you need bath re-enamelling in Cummertrees?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Customers generally contact us about:
- A coloured bath you want in white
- Stains that will not shift
- Thin, worn enamel in places
- A roll-top that’s seen better days
Before booking anyone
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- How your room will be protected
- How changes to the job are handled
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Cummertrees and the surrounding area
Cummertrees is about 12 miles south-east of Dumfries, in Dumfries and Galloway. Anywhere in DG12, we carry out the work at your property. Our technicians cover all 138 towns and villages across Dumfries and Galloway. Our jobs stretch from Cummertrees to Edinburgh (66 miles away).
All of DG12 is within our area, from the main roads to the quietest streets. We also cover the places around Cummertrees: Powfoot (1 mile south-east), Kelhead (2 miles north), Newbie (3 miles east), Howes (3 miles east) and Clarencefield (3 miles north-west). Larger places within reach include Dumfries (12 miles north-west), Lockerbie (9 miles north), Heathhall (12 miles north-west), Newbridge Drive (13 miles north-west), Gretna (11 miles east) and Lochmaben (11 miles north).
Local landmarks in Cummertrees
In Cummertrees, that means homes near Cummertrees Parish Church and the streets around them. For rail, the closest station is Annan station, roughly 3.4 miles east of the centre. Further afield, we also cover the area around Annan Hospital (4 miles east) and Annan Castle (3.3 miles east). For a walk, there’s Campfield Marsh RSPB reserve.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Repair or replace in Cummertrees?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Cummertrees clients choose us
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
Read our full price list and bath cost comparison.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When a repair is not the answer
In fairness, some problems need a different fix:
- Steel that has corroded right through
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Cummertrees questions
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
What areas do you cover?
Across the UK. Prices do not change with location.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you come to Cummertrees?
Yes. We cover the entire UK and travel to Cummertrees. Send photos and we will quote, or call 0345 017 0787.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
