Dumfries and Galloway · Scotland

Bath Re-enamelling in Kelhead

Bath re-enamelling across Kelhead and nearby, usually in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Several chips and rust patches
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Kelhead homes

How the visit works

Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It generally takes most of the day, and you are welcome to carry on with your day while we work.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the next day.

How to prepare

  • Let us know about parking or access
  • Open a window if you can
  • Mention if the room is upstairs or in a flat

Getting a price

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send photos for a quote

Related advice

How we handle bath re-enamelling in Kelhead

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. If you’re dealing with an outdated colour you’d like to change and stains that won’t shift, we can usually put it right.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Location
Kelhead (DG12)
Area hub
Dumfries and Galloway
Cover
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Why repair rather than replace?

If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • No extra charge for your area
  • Most jobs done in one visit
  • We’ll tell you if it’s not worth repairing
  • A year’s guarantee on all work

Read our prices page and guide to resurfacing and replacement costs.

Our work in Kelhead

Kelhead is about 11 miles east of Dumfries, in Dumfries and Galloway. Customers in Kelhead get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Kelhead is one of 138 places in Dumfries and Galloway where we work. You can also see our page for Edinburgh, about 65 miles away.

Our technicians cover all of DG12 and the streets around it. Neighbouring places we cover include Cummertrees (2 miles south), Powfoot (2 miles south), Brydekirk (3 miles east), Howes (3 miles south-east) and Newbie (3 miles south-east). We also work in nearby towns such as Dumfries (11 miles west), Annan (4 miles south-east), Lockerbie (8 miles north), Heathhall (11 miles north-west), Newbridge Drive (13 miles north-west) and Gretna (11 miles east).

Local landmarks in Kelhead

Kelhead’s nearest station is Annan station, roughly 3.6 miles south-east of the centre. Other landmarks nearby include Ruthwell Museum (3 miles south-west) and Annan Hospital (4 miles south-east).

Map of Kelhead © OpenStreetMap contributors

Aftercare tips

It’s all simple stuff:

  • Don’t use the bath until it has fully cured
  • Avoid suction-cup mats
  • Stick to gentle, non-abrasive cleaners
  • Dry the bath after use to stop limescale

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

What bath re-enamelling costs

Prices start from £350. Prices are worked out job by job. What matters most is:

  • Where the damage is and how we get to it
  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • Unusual colours or finishes

Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Send pictures for a quote

Two or three clear photos are normally enough. It helps if you send:

  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Any details about the material

For a price in Kelhead, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

If you manage property in Kelhead, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.

Common questions in Kelhead

What happens after I send photos?

We review the photos and send a fixed quote.

Are there extra charges for Kelhead?

We do not add a call-out fee. The fixed quote covers the visit and the work.

Does re-enamelling smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

How long does re-enamelling take?

One day for most baths and can be used the day after. We give you timings with the quote.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Dumfries and Galloway.

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Is there a guarantee?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Steel that has corroded right through
  • Damage hidden under a previous coating, until it’s stripped back
  • A poorly supported acrylic bath, until it’s firmed up

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.