Neath Port Talbot · Wales
Bath Re-enamelling for Cwrt-sart homes
Problem with your bath in Cwrt-sart? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Keeping it looking good
How the surface is treated afterwards matters:
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Bath re-enamelling at your home in Cwrt-sart
Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We’re often asked to fix wear marks under the taps and a period or roll-top bath worth keeping, in pressed steel baths, basins & shower trays and acrylic baths.
All our work is covered by our one-year guarantee, wherever you are in Neath Port Talbot.
- Area
- Cwrt-sart (SA11)
- County
- Neath Port Talbot
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Neath Port Talbot and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Common problems we fix in Cwrt-sart
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Send us a photo if you notice any of these:
- Worn patches where water runs and sits
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
What your quote should include
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- How the colour is matched
- What the guarantee covers, and for how long
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Cwrt-sart. The price depends on:
- Access to the area
- The type of damage
- How many areas need work
- Whether we combine several jobs
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you are under no obligation.
Common questions in Cwrt-sart
Can you price it without visiting?
In nearly every case. If photos do not show enough, we will ask for another angle.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Cwrt-sart clients choose us
- Everything repaired in place
- Free fixed quotes from pictures
- We leave the room as we found it
- One-year guarantee on every repair
See our full price list or guide to resurfacing and replacement costs.
How it works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
Towns and villages near Cwrt-sart
Other services in Cwrt-sart
Cwrt-sart and the surrounding area
Cwrt-sart is about 1 mile south of Neath, in Neath Port Talbot. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 100 towns and villages in Neath Port Talbot, from the larger towns to small villages.
All of SA11 is covered. We regularly work on streets such as Old Road, Farm Road and Tyla Road. We also travel to Ynysymaerdy (1 mile east), Penrhiwtyn (1 mile north), Briton Ferry (1 mile south-west), Pencaerau (1 mile north) and Mount Pleasant (1 mile north-east). Within a short drive, we also cover Port Talbot (3 miles south), Sandfields (3 miles south), Baglan Moors (3 miles south), Sandfields West (3 miles south), Sandfields East (4 miles south) and Pontardawe (6 miles north).
Around Cwrt-sart
In Cwrt-sart, that means homes near Ysgol Carreg Hir, Dwr-y-Felin Comprehensive School and Church of St Clement and the streets around them. Cwrt-sart has its own railway station: Briton Ferry station. Well-known places in the area include Aberafan Centre (3.4 miles south) and Neath Museum (1.5 miles north). Open spaces near Cwrt-sart include Pen Tyla Morris and Gnoll Estate Country Park lake 1.
- Parks and local facilities nearby include Pelenna (2.6 miles east)
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
