Rhondda Cynon Taff · Wales
Bath re-enamelling & resurfacing in Cymmer, Rhondda Cynon Taff
Local bath re-enamelling for Cymmer: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
Do you need bath re-enamelling in Cymmer?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Send us a picture if you notice any of these:
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
- An old resurfacing that is failing
- Brown or grey marks that don’t clean off
Comparing quotes
- What happens if they find more damage
- Who will actually do the work
- How the room is protected while they work
- What aftercare is recommended
How we handle bath re-enamelling in Cymmer
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We regularly repair Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people get in touch are an outdated colour you’d like to change and a roll-top that’s seen better days.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Cymmer (CF39, CF37)
- Region
- Rhondda Cynon Taff
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Cymmer
Other services in Cymmer
For landlords and businesses
Landlords, letting agents and housing providers in Cymmer use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How it works
We work cleanly and quietly. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Cymmer. What changes the price is:
- What kind of damage it is
- The colour and finish to match
- The material and finish
- Whether old repairs or coatings need taking off
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Details of any past repairs
- A coin or ruler next to the damage for scale
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Our work in Cymmer
Cymmer is about 3 miles west of Pontypridd, in Rhondda Cynon Taff. Wherever you are in the CF39 postcode area, a technician comes to you. We cover 133 places in Rhondda Cynon Taff.
Every address in CF39 and CF37 is covered. Whether you live on Eirw Road, North Road and Hafod Lane or anywhere nearby, we can come to you. Cymmer sits on or near the A4058 and A4233, so getting to you is simple. Neighbouring places we cover include Llwyncelyn (1 mile south-west), Trehafod (1 mile south-east), Hopkinstown (2 miles east), Pant-y-graig-wen (2 miles east) and Ynysybwl (2 miles north-east). Within a short drive, we also cover Aberdare (7 miles north), Pontypridd (3 miles east), Mountain Ash (5 miles north), Rhondda (4 miles north-west), Church Village (5 miles south-east) and Mountain Ash East (5 miles north).
Around Cymmer
Around Cymmer, we work in homes near Hafod Primary School, Church of St Paul and Llwyncelyn Hotel and the streets around them. You will also find Ysgol Gyfun Cwm Rhondda (1 mile south-west) and Ysgol Gyfun Cwm Rhondda (1 mile south-west). For rail, the closest station is Porth station, roughly 0.5 miles west. Well-known places in the area include University of South Wales Art Collection Museum (3.6 miles south-east) and Dewi Sant Hospital (2.6 miles south-east). Green spaces nearby include Ferndale Lake and Mynydd y Glyn.
Your questions about bath re-enamelling in Cymmer
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Are there extra charges for Cymmer?
No. Our quotes include travel, with the same prices everywhere we work.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
What a repair cannot fix
Some jobs are not right for a repair, for example:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
