Rhondda Cynon Taff · Wales

Bath & shower resealing (mastic) in Cymmer, Rhondda Cynon Taff

Bath resealing for Cymmer, without a refit. Get a fixed price from your photos, then we come to you.

  • Gaps in the seal
  • Mould you can’t clean out
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Cymmer homes

Bath resealing in Cymmer, done in place

A reseal is a small job that makes a big difference. Clean, white joints make a bathroom look cared for, and they protect the walls and floor. If you are dealing with an untidy old seal and old sealant that looks dirty, we can usually put it right, whatever the material.

Big or small, it’s backed by a one-year guarantee.

Area
Cymmer (CF39, CF37)
Area hub
Rhondda Cynon Taff
Cover
One year on every repair
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Resealing in Cymmer: why it matters

Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, and that damage costs much more to fix. We charge the same wherever you are, with no extra for Cymmer. What changes the price is the job itself: the material, the amount of damage and how many items.

Why us?

  • Typically one visit, start to finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • Nothing taken out or refitted
  • Rooms protected and left tidy

Take a look at our full price list.

What your bath or shower is made of matters

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

When to call us in Cymmer

Most reseals are because of black mould. It grows into the silicone, so cleaning only removes the surface.

Signs it’s time to call us include:

  • Missing sealant behind the taps
  • Sealant that’s split or lifting
  • Black mould in the sealant
  • Water getting behind the bath or tray

What to look for in a quote

  • What happens if the damage is worse than the photos show
  • Whether there are any call-out or travel charges
  • How the room is protected while they work
  • Aftercare advice

How to compare quotes

What we can’t put right

A repair is not right for every job, including:

  • Rotten walls or floors behind the bath
  • A flexing bath
  • Very wide gaps that need a trim

Not sure? Send pictures and we will give you a straight answer before booking.

Surfaces we repair

  • Wet rooms
  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units
  • Shower trays & enclosures

Cymmer: your questions answered

My seal keeps tearing. Why?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

What does bath resealing cost?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Is a repair better than a new one?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Do you cover Cymmer?

Yes. We work across the UK and come to Cymmer. Send photos and we will quote, or call 0345 017 0787.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Open a window after bathing
  • Ventilate the bathroom well
  • Clean the sealant gently and regularly
  • Dry the seal after bathing

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.

About Cymmer

Cymmer is about 3 miles west of Pontypridd, in Rhondda Cynon Taff. From the centre of Cymmer to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Cymmer is one of 133 places in Rhondda Cynon Taff we cover.

Our visits in CF39 and CF37 are booked in the same way as anywhere else. Jobs here include addresses on Eirw Road, North Road and Hafod Lane and the roads around them. Being close to the A4058 and A4233, Cymmer is simple for us to get to. We also travel to Llwyncelyn (1 mile south-west), Trehafod (1 mile south-east), Hopkinstown (2 miles east), Pant-y-graig-wen (2 miles east) and Ynysybwl (2 miles north-east). Within a short drive, we also cover Aberdare (7 miles north), Pontypridd (3 miles east), Mountain Ash (5 miles north), Rhondda (4 miles north-west), Church Village (5 miles south-east) and Mountain Ash East (5 miles north).

Local landmarks in Cymmer

Locally, our jobs take us to homes close to Hafod Primary School, Church of St Paul and Llwyncelyn Hotel, among other places. Nearby too are Ysgol Gyfun Cwm Rhondda (1 mile south-west) and Ysgol Gyfun Cwm Rhondda (1 mile south-west). For rail, the closest station is Porth station, about 0.5 miles west. A little further out are University of South Wales Art Collection Museum (3.6 miles south-east) and Dewi Sant Hospital (2.6 miles south-east). The countryside around Cymmer includes Ferndale Lake and Mynydd y Glyn.

Map of Cymmer © OpenStreetMap contributors

Can I fix it myself?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

How the visit works

Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a couple of hours. We leave the room clean.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

Before we arrive

  • Clear the area around the damage
  • Mention any parking restrictions or tricky access
  • Point us to the nearest place to park

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price the same day in most cases.

Get a fixed quote

Read more

Landlord and trade work in Cymmer

If you manage property in Cymmer, we will quote for several properties at once. Send pictures for each one and we’ll price them together.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.