Midlothian · Scotland
Bath re-enamelling & resurfacing in D'Arcy, Midlothian
Full bath re-enamelling and resurfacing in D'Arcy, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- An original cast iron bath that needs restoring

How we handle bath re-enamelling in D'Arcy
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s staining under the taps and around the waste and a bath in a colour that no longer suits, we can generally put it right, on acrylic baths, pressed steel baths and Victorian roll-tops alike.
All our work is covered by our one-year guarantee.

- Where
- D'Arcy (EH22)
- Region
- Midlothian
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
How to look after the repair
Nothing complicated is needed:
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Signs you need bath re-enamelling in D'Arcy
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- Brown or grey marks that do not clean off
- A period or roll-top bath worth keeping
- Wear marks under the taps
- A coloured bath you want in white
Comparing quotes
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
- What preparation is included
- How the room is protected while they work
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
When a repair is not the answer
Before you book, it’s worth knowing the limits:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Towns and villages near D'Arcy
More services for D'Arcy
How the visit works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes the best part of a day in most cases. The room is left tidy and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Where we work around D'Arcy
D'Arcy is about 2 miles south-east of Dalkeith, in Midlothian. Anywhere in EH22, we come to you. D'Arcy is one of 33 places in Midlothian where we work. We work right across the region, from D'Arcy to Edinburgh (9 miles away).
Our repair technicians cover all of EH22 and the streets around it. Jobs here include addresses on Oak Place, Finlay Place and Larch Crescent. If you are just outside D'Arcy, we cover Mayfield (1 mile west), Edgehead (1 mile east), Easthouses (1 mile north-west), Newtongrange (1 mile west) and Gowkshill (2 miles south-west). Larger places within reach include Bonnyrigg (3 miles west), Penicuik (8 miles west), Loanhead (5 miles west), Shawfair (4 miles north-west), Danderhall (4 miles north-west) and Rosewell (5 miles west).
Around D'Arcy
Locally, our jobs take us to homes close to Newbattle Community High School and Dalkeith and the streets around them. D'Arcy’s nearest station is Newtongrange station, roughly 1.8 miles west of the centre. Further afield, we also cover the area around Oxenfoord Castle (1.8 miles east) and Cousland Smiddy (2.6 miles north-east).
D'Arcy questions
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How much does bath re-enamelling cost in D'Arcy?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your EH22 postcode.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether we combine several jobs
- Where the damage is and how we get to it
- How hard the colour is to match
- The material
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- Something in shot to show the size
- Natural light rather than flash
- A wider photo showing the whole bath
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.

