South Ayrshire · Scotland
Bath re-enamelling & resurfacing in Dalrymple, South Ayrshire
Fixed-price bath re-enamelling in Dalrymple and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Bath re-enamelling in Dalrymple without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a period or roll-top bath worth keeping and a coating lifting around the plughole, we can generally put it right.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Dalrymple (KA6)
- Region
- South Ayrshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Dalrymple
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Landlords, letting agents and housing providers in Dalrymple use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About Dalrymple
Dalrymple is about 4 miles south of Ayr, in South Ayrshire. Clients in Dalrymple get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Dalrymple is one of 52 places in South Ayrshire where we work. We work right across the region, from Dalrymple to Glasgow (34 miles away).
Jobs in KA6 work the same way as everywhere else we cover. You’ll find streets such as Main Street, Cedar Terrace and Burnton Court, all of which we cover. Dalrymple is on the B7034, so it’s easy for us to reach. We also cover the places around Dalrymple: Hollybush (2 miles east), Minishant (2 miles west), Alloway (3 miles north-west), Kirkmichael (4 miles south) and Forehill (4 miles north). Larger places within reach include Ayr (4 miles north), Troon (11 miles north), Prestwick (7 miles north), Heathfield (6 miles north), Belmont (4 miles north) and Maybole (5 miles south-west).
Local landmarks in Dalrymple
Our customers here include homes close to Parish Church and Churchyard. The nearest railway station is Ayr station, roughly 4.5 miles north. Nearby you will also find Robert Burns Birthplace Museum (2.8 miles north-west) and Skeldon Castle (1 mile east). Not far away are Lindston Loch.
Do you need bath re-enamelling in Dalrymple?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Wear marks under the taps
- An original cast iron bath that needs restoring
Questions to ask before booking
- What preparation is included
- How long it needs to cure
- What happens if they find more damage
- How the room is protected while they work
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Dalrymple
- Free fixed quotes from pictures
- Everything repaired in place
- A year’s guarantee on all work
- One visit for most repairs
Take a look at our full price list and resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- The material and finish
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- What it’s made of, if you know
- A photo taken from further back
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
When we would advise against a repair
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Other services in Dalrymple
What we do, step by step
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Get a quote
Send us a picture of the damage and a wider shot of the entire item, with your KA6 postcode, and we will reply with a fixed price.
Related advice
Dalrymple: your questions answered
Can you price it without visiting?
Typically, yes. Clear photos let us give you a fixed price without visiting.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do the outside of a roll-top?
Yes. Inside and out.
How long does re-enamelling take?
One day for most baths, ready the day after. We give you timings with the quote.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Will there be a smell?
There may be a mild smell during the work.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
