Northamptonshire · England
Bath Re-enamelling for Dalscote homes
Fixed-price bath re-enamelling in Dalscote and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
Bath re-enamelling at your home in Dalscote
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Typical jobs include a coloured bath you want in white and an old resurfacing that’s failing, across pressed steel baths, cast iron baths and acrylic baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Dalscote (NN12)
- County
- Northamptonshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Don’t let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Do not leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
When we’d advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
Send us pictures and we will tell you honestly.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Dalscote. What changes the price is:
- Unusual colours or finishes
- What kind of damage it is
- Access to the area
- How much damage there is
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
Two or three clear photos are generally enough. Try to include:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Repair or replace in Dalscote?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Colour-matched on site
- Same prices wherever you are
- Every repair guaranteed for a year
- Fixed prices from your photos
See our full price list or bath cost comparison.
Your questions about bath re-enamelling in Dalscote
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Nearby places to Dalscote
What else we do in Dalscote
What we’re called out for in Dalscote
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted:
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
- A coating lifting around the plughole
What to look for in a quote
- Who will actually do the work
- How soon you can use it again
- Whether the colour is mixed to match
- What preparation is included
Dalscote and nearby
Dalscote is about 4 miles north of Towcester, in Northamptonshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Dalscote is one of 364 towns and villages in Northamptonshire where we work. Our nearest city page is Birmingham, about 43 miles away.
Our technicians cover all of the NN12 postcode area and the streets around it. If you’re just outside Dalscote, we cover Gayton (1 mile east), Tiffield (2 miles south-east), Blisworth (3 miles east), Milton Malsor (3 miles east) and Shutlanger (4 miles south-east). Within a short drive, we also cover Northampton (7 miles north-east), Wellingborough (15 miles north-east), Daventry (9 miles north-west), Brackley (12 miles south-west), Wolverton (11 miles south-east) and Stony Stratford (11 miles south-east).
Landmarks near Dalscote
Locally, our jobs take us to homes close to Church of Holy Cross, Eastcote Arms Public House and Campion School, among other places. Also close by are Tiffield Pocket Park (1.4 miles south-east) and Pattishall Church of England Primary School (0.6 miles west). A little further out are Farthingstone Castle Dykes (4.5 miles west). Not far away are Bugbrooke Meadows.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
