Northamptonshire · England
Bath Re-enamelling for Milton Malsor homes
Bath re-enamelling in and around Milton Malsor: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Your questions about bath re-enamelling in Milton Malsor
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
How do I get a price for bath re-enamelling in Milton Malsor?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Bath re-enamelling in Milton Malsor, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with a period or roll-top bath worth keeping and a peeling or bubbling previous coating, we can normally put it right, on pressed steel baths, acrylic baths and cast iron baths alike.
Big or small, it’s backed by a one-year guarantee in Milton Malsor and across Northamptonshire.
- Location
- Milton Malsor (NN7)
- County
- Northamptonshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow the best part of a day. Before we go, we will explain when it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Open a window if you can
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
About Milton Malsor
Milton Malsor is about 4 miles south of Northampton, in Northamptonshire. Across the NN7 area, a technician comes to you. Our repair technicians cover all 364 towns and villages across Northamptonshire, from the larger towns to small villages. We work right across the region, from Milton Malsor to Birmingham (about 45 miles away).
Our visits in NN7 are booked in the same way as anywhere else. Local streets include High Street, Orchard Close and Green Street, and we cover them all. Neighbouring places we cover include Collingtree (1 mile east), Blisworth (1 mile south-west), Gayton (2 miles west), Tiffield (3 miles south-west) and Dalscote (3 miles west). Larger places within reach include Northampton (4 miles north), Wellingborough (12 miles north-east), Daventry (11 miles north-west), Rushden (15 miles north-east), Brackley (14 miles south-west) and Towcester (5 miles south-west).
What’s near Milton Malsor
Our clients here include homes close to Church of the Holy Cross, Abbeyfield School and Milton Parochial Primary School and the streets around them. For rail, the closest station is Northampton station, roughly 3.1 miles north. Nearby you will also find Northampton Castle (3.1 miles north) and Northampton General Hospital (3.5 miles north-east). Open spaces near Milton Malsor include Duston Mill Meadow.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we can’t put right
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
If in doubt, send photos and we’ll say what we think.
Materials we work on in Milton Malsor
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why choose Surface Doctor in Milton Malsor
- One price list for the whole UK
- Free fixed quotes from pictures
- Colour-matched on site
- We come to you, anywhere in the UK
See our prices page and bath cost comparison.
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Milton Malsor. The price reflects:
- How many items we do on one visit
- Any earlier repairs that need removing first
- How hard the colour is to match
- Access to the area
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- Where you are, by postcode
- One sharp close-up of the damage
Upload a picture of the damage and one of the whole item, and tell us you’re in Milton Malsor, and we will reply with a fixed quote.
Landlord and trade work in Milton Malsor
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Milton Malsor, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Towns and villages near Milton Malsor
More services for Milton Malsor
About our accreditations · Every repair comes with a one-year guarantee.
