Lancashire · England
Bath re-enamelling & resurfacing in Dalton, Lancashire
Bath re-enamelling across Dalton and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Dalton
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with brown or grey marks that don’t clean off and an outdated colour you’d like to change, we can help, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Dalton (WN8)
- Area hub
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and let you know when you can use it again.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Places near Dalton
More services for Dalton
Where we work around Dalton
Dalton is about 1 mile north-east of Skelmersdale, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Dalton is one of 482 towns and villages in Lancashire we cover. We work right across the region, from Dalton to Liverpool (about 13 miles away).
We cover every part of the WN8 postcode area. Whether you live on Beacon Lane, Ashurst Road and Elmer's Green Lane or a nearby road, a technician can come to you. Other places close to Dalton include Skelmersdale (1 mile south-west), Roby Mill (2 miles east), Newburgh (2 miles north-west), Parbold (2 miles north) and Walthew Green (2 miles east). Further out, we also cover Preston (14 miles north), Chorley (8 miles north-east), Bamber Bridge (12 miles north), Leyland (9 miles north), Fulwood (15 miles north) and Ormskirk (5 miles west).
Around Dalton
In Dalton, that means homes near Maharishi School, Church of St Michael and The Old Toby Public House. Dalton’s nearest station is Parbold station, about 1.7 miles north. Well-known places in the area include Wrightington Hospital (2.7 miles north-east). Green spaces nearby include Billinge Hill.
Honest limits
Some jobs aren’t right for a repair, for example:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Dalton
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Common questions in Dalton
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you cover Dalton?
Yes. We work across the UK and travel to Dalton. Send photos and we’ll quote, or call 0345 017 0787.
How do I get a price for bath re-enamelling in Dalton?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
For landlords and businesses
We work for landlords, letting agents and housing providers in Dalton as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
If you manage property in Dalton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from photos. These are the things that affect it:
- What kind of damage it is
- Where the damage is and how we get to it
- The material
- How many items we do on one visit
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
How to get a fixed price
When you take your pictures, these tips help us give you a firm price:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- The material, if you know it
Email us a picture of the damage and a wider shot of the entire item, and tell us you’re in Dalton, and we’ll reply with a fixed price.
Do you need bath re-enamelling in Dalton?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Contact us if you’ve noticed any of these:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Wear marks under the taps
Before you book anyone
- How long the guarantee is and what it covers
- How your room will be protected
- If travel is included in the price
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
