Lancashire · England
Bath Re-enamelling in Ormskirk
Full bath re-enamelling and resurfacing for homes and businesses in Ormskirk and across Lancashire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
How we handle bath re-enamelling in Ormskirk
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. If you’re dealing with a bath in a colour that no longer suits and stains that won’t shift, we can normally put it right.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Area
- Ormskirk (L39, L40)
- County
- Lancashire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Towns and villages near Ormskirk
What else we do in Ormskirk
Ormskirk questions
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
What areas do you cover?
We cover the entire UK, including Ormskirk and the rest of Lancashire. Send your postcode with your photos and we will offer you dates.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Repair or replace: which is better?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- No extra charge for your area
- Colour mixed on the day to match
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
See our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- The material
- Access to the area
- Whether we combine several jobs
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Two or three clear photos are typically enough. It helps if you send:
- What it’s made of, if you know
- One sharp close-up of the damage
- A photo taken from further back
- Natural light rather than flash
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Do you need bath re-enamelling in Ormskirk?
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is usually perfectly sound.
Send us a photo if you notice any of these:
- A coating lifting around the plughole
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
Comparing quotes
- What happens if they find more damage
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
- How the room is protected while they work
Looking after it afterwards
To keep it looking its best for years:
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Where we work around Ormskirk
Ormskirk is about 6 miles north of Kirkby, in Lancashire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Ormskirk is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Ormskirk to Liverpool (11 miles away).
Our visits in L39 and L40 are booked in the same way as anywhere else. Jobs here include addresses on Station Road, Brook Farm Close and Aughton Street. Main roads around Ormskirk include the A59 and A570, so getting to you is simple. Close by, we cover Scarth Hill (1 mile south-east), Westhead (2 miles east), Brighouse Green (2 miles east), Stanley Gate (3 miles south-east) and Royal Oak (3 miles south). Further out, we also cover Chorley (12 miles north-east), Lytham St Anne's (14 miles north), Bamber Bridge (15 miles north-east), Leyland (12 miles north-east), Skelmersdale (5 miles east) and Penwortham (14 miles north-east).
Near you in Ormskirk
Typical jobs here are in homes near Roman Catholic Church of St Anne, The Court Leet pub and St. Bede's Catholic High School and the streets around them. The nearest railway station is Ormskirk station, roughly 0.5 miles north-east of the centre. Well-known places in the area include Ormskirk and District General Hospital (0.8 miles east). Not far away are Martin Mere and WWT Martin Mere.
When a repair isn’t the answer
We will not take on work that won’t last, so these are the limits:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which typically takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
