Kent · England
Bath Re-enamelling for Daniel's Water homes
We travel to Daniel's Water for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
Bath re-enamelling in Daniel's Water, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We work on Victorian roll-tops, basins & shower trays and pressed steel baths, and the jobs we see most are a bath that stays dull however much you clean it and a peeling or bubbling previous coating.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Daniel's Water (TN26)
- Region
- Kent
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
See our prices page and resurfacing vs replacement cost guide.
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take a full day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Point us to the nearest place to park
- Have a window or extractor fan available
- Clear the area around the damage
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Towns and villages near Daniel's Water
More services for Daniel's Water
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- What kind of damage it is
- The size and number of damaged areas
- Where the damage is and how we get to it
- Doing more than one item at once
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed price
You can generally get a fixed quote without us visiting. To make it quick:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A wider photo showing the whole bath
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Your questions about bath re-enamelling in Daniel's Water
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Daniel's Water?
Yes. We cover the entire UK and come to Daniel's Water. Send us photos for a fixed quote, or call 0345 017 0787.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What areas do you cover?
We cover the whole UK, including Daniel's Water and the rest of Kent. Send your postcode with your photos and we will offer you dates.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Our work in Daniel's Water
Daniel's Water is about 3 miles west of Ashford, in Kent. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. We work in 922 places across Kent. We work right across the region, from Daniel's Water to London (about 46 miles away).
Jobs in TN26 are booked in the same way as anywhere else. Other places close to Daniel's Water include Fleeden (1 mile south), Chilmington Green (1 mile south-east), Great Chart (1 mile east), Godinton (2 miles north-east) and Hothfield (2 miles north). Within a short drive, we also cover Maidstone (15 miles north-west), Ashford (3 miles east), Sittingbourne (14 miles north), Faversham (13 miles north), Hythe (13 miles east) and Davington (13 miles north).
Near you in Daniel's Water
Typical jobs here are in homes near Ashford Community Woodland. For rail, the closest station is Pluckley station, roughly 2.6 miles north-west of the centre. Further afield, we also cover the area around County Square (3.1 miles east) and Romden Castle (3.9 miles west). Green spaces nearby include Orlestone Forest.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Signs you need bath re-enamelling in Daniel's Water
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Contact us if you’ve noticed:
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
Questions to ask before you book
- How to look after the finish
- What the guarantee covers, and for how long
- How soon you can use it again
- How the colour is matched
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
