Nottingham · England
Bath Re-enamelling for Daybrook homes
Full bath re-enamelling and resurfacing for homes and businesses in Daybrook and across Nottingham. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- A roll-top that’s seen better days
About our bath re-enamelling in Daybrook
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on pressed steel baths, cast iron baths and basins & shower trays, and common reasons people contact us are a coating lifting around the plughole and a bath that stays dull however much you clean it.
We stand behind the work with a one-year guarantee.
- Location
- Daybrook (NG5)
- Region
- Nottingham
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Daybrook
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
Keep an eye out for these signs:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
- Lots of chips and rust spots
What your quote should include
- What aftercare is recommended
- Who turns up on the day
- Whether they match the colour on site
- What preparation is included
Where we work around Daybrook
Daybrook is about 1 mile west of Arnold, in Nottingham. Jobs in Daybrook are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover all 51 towns and villages across Nottingham, from the larger towns to small villages. We work right across the region, from Daybrook to Birmingham (48 miles away).
We cover every part of the NG5 postcode area. From Dean Road, Park Road and Mill Lane or anywhere nearby, we can come to you. With the A60 close by, Daybrook is easy for our repair technicians to reach. Nearby, we also work in Arnold (1 mile east), Red Hill (1 mile north), Warren Hill (1 mile north-west), Top Valley (2 miles west) and Rise Park (2 miles north-west). We also work in nearby towns such as Nottingham (3 miles south-west), Sneinton (3 miles south), St Ann's (3 miles south), Clifton (7 miles south), The Park Estate (4 miles south) and Hockley (3 miles south).
Near you in Daybrook
Locally, our jobs take us to homes close to Arnbrook Primary School, St. Paul's Church and The Ernehale pub. You will also find Woodthorpe Grange Park (1.1 miles south) and Redhill Academy (0.7 miles north-east). For rail, the closest station is Bulwell station, about 2.4 miles west of the centre. A little further out are South Nottinghamshire Hussars Museum (2.3 miles west) and Victoria Centre (3 miles south). Open spaces near Daybrook include Colwick Woods.
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a full day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Places near Daybrook
Other services in Daybrook
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why us?
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Nothing taken out or refitted
Take a look at our prices page and bath cost comparison.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Landlords, agents and businesses in Daybrook
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Common questions in Daybrook
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- A bath split right through the body
Send us photos and we will tell you honestly before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
