Hampshire · England
Bath re-enamelling & resurfacing in Dean, Hampshire
Our technicians come to Dean for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Several chips and rust patches
- Stains that won’t shift
Aftercare tips
It’s all simple stuff:
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Dean, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. Typical jobs include lots of chips and rust spots and worn patches where water runs and sits, on Victorian roll-tops, pressed steel baths and acrylic baths.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Dean (SO32)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
How to get a price
Send us a photo of the damage and one of the whole item, and tell us you’re in Dean, and we’ll come back with a fixed quote.
Read more
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Dean: your questions answered
Which areas do you work in?
The whole UK, including all of Hampshire. Send your postcode with your photos and we’ll confirm dates.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you come to Dean?
Yes, we do. Technicians travel to Dean from across the region, and the price is the same as everywhere else.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What happens after I send pictures?
We review the pictures and send a fixed quote.
How long is the bath unusable?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing generally wins. Prices start from £350. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Dean clients choose us
- We leave the room as we found it
- Colour-matched on site
- No need to remove anything
- One price list for the entire UK
Take a look at our full price list or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How much damage there is
- Access to the area
- The material
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for Dean. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Try to send:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Signs you need bath re-enamelling in Dean
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for these signs:
- Wear marks under the taps
- Stains that will not shift
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
Comparing quotes
- Who turns up on the day
- How the colour is matched
- Whether cleaning and preparation are in the price
- How your room will be protected
What a repair can’t fix
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Dean
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Also in Dean
Our work in Dean
Dean is about 6 miles north-east of Hedge End, in Hampshire. Anywhere in SO32, a technician comes to you. Dean is one of 683 towns and villages in Hampshire we cover. You can also see our page for London, about 60 miles away.
Jobs in SO32 are booked in the same way as anywhere else. You will find streets such as Dean Lane, Little Ashton Lane and Limekiln Lane, all of which we cover. We also cover the places around Dean: The Hangers (1 mile east), Upper Swanmore (2 miles south-east), Swanmore (2 miles south), Hill Grove (2 miles south-east) and Droxford (3 miles east). Larger places within reach include Winchester (8 miles north-west), Gosport (12 miles south), Havant (12 miles south-east), Eastleigh (6 miles west), Fareham (8 miles south) and Horndean (9 miles south-east).
Landmarks near Dean
Our customers here include homes close to Bishops Waltham Infant School, Swanmore College of Technology and Church of St Peter, among other places. For rail, the closest station is Botley station, roughly 4.6 miles south-west of the centre. Further afield, we also cover the area around Bishop's Waltham Museum (1.4 miles south-west). For a walk, there’s Bishops Waltham Branch LNR and Beacon Hill.
About our accreditations · Every repair comes with a one-year guarantee.
