North Yorkshire · England
Bath Re-enamelling in Delves
Bath re-enamelling in Delves without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Several chips and rust patches
Our work in Delves
Delves is about 8 miles south-west of Whitby, in North Yorkshire. From the centre of Delves to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 626 places across North Yorkshire. Our jobs stretch from Delves to Newcastle upon Tyne (about 52 miles away).
Jobs in YO22 are booked in the same way as anywhere else. If you are just outside Delves, we cover Carr End (1 mile north-west), Egton (2 miles north-east), Beck Hole (2 miles south-east), Grosmont (2 miles east) and Darnholm (3 miles south-east). Within a short drive, we also cover Whitby (8 miles north-east), Pickering (13 miles south), Kirkbymoorside (13 miles south-west), Great Ayton (15 miles west), Burniston (15 miles south-east) and Thornton-le-Dale (14 miles south).
Near you in Delves
We visit homes around The Horse Shoe Hotel, St Hedda's Roman Catholic Primary School and Church of St Thomas. For rail, the closest station is Glaisdale station, about 0.8 miles north-west of the centre. Other landmarks nearby include Museum of Victorian Science (0.8 miles north-west). Not far away are Danby Beacon.
About our bath re-enamelling in Delves
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on cast iron baths, acrylic baths and basins & shower trays, and common reasons people get in touch are an original cast iron bath that needs restoring and several chips and rust patches.
All our work is covered by our one-year guarantee.
- Area
- Delves (YO22)
- Region
- North Yorkshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Delves
Your questions about bath re-enamelling in Delves
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you work in Delves?
Yes, we do. Repair technicians travel to Delves from across the region, and the price is the same as everywhere else.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What we cannot put right
We will always be straight with you, so here’s what a repair won’t do:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price depends on:
- How easy the damage is to reach
- Unusual colours or finishes
- The size and number of damaged areas
- What kind of damage it is
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
We price nearly every job from pictures. This is what we need:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Something in shot to show the size
- One picture of the whole bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Signs you need bath re-enamelling in Delves
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
People typically call us after spotting something like this:
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- Wear marks under the taps
- An original cast iron bath that needs restoring
What your quote should include
- Aftercare advice
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say straight away whether it can be repaired.
Advice
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
