North Yorkshire · England
Bath re-enamelling & resurfacing in Grosmont, North Yorkshire
Full bath re-enamelling and resurfacing in Grosmont, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
How we handle bath re-enamelling in Grosmont
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our technicians work on basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are several chips and rust patches and a dull, rough surface that won’t come clean.
All our work is covered by a one-year guarantee, wherever you are in North Yorkshire.
- Location
- Grosmont (YO22)
- Area hub
- North Yorkshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
For anyone letting property in or around Grosmont, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What we cannot put right
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Grosmont
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Grosmont: your questions answered
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
How much does bath re-enamelling cost in Grosmont?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Other services in Grosmont
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Whether we combine several jobs
- How much damage there is
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- Any details about the material
- A coin beside the damage so we can judge size
- One picture of the entire bath
- One sharp close-up of the damage
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Normally one visit, start to finish
- No extra charge for your area
- Everything repaired in place
- We leave the room as we found it
See our full price list and resurfacing vs replacement cost guide.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for the best part of a day. Before leaving, we tell you when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Make sure the room can be ventilated
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Our work in Grosmont
Grosmont is about 5 miles south-west of Whitby, in North Yorkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Grosmont is one of 626 towns and villages in North Yorkshire we cover. You can also see our page for Newcastle upon Tyne, about 53 miles away.
Our visits in YO22 are booked in the same way as anywhere else. You will find streets such as Ings Terrace, Front Street and Waterloo. If you’re just outside Grosmont, we cover Egton (2 miles north-west), Beck Hole (2 miles south), Darnholm (2 miles south), Goathland (2 miles south) and Delves (2 miles west). Within a short drive, we also cover Whitby (5 miles north-east), Pickering (13 miles south), Newby (15 miles south-east), Kirkbymoorside (14 miles south-west), Scalby (15 miles south-east) and Throxenby (15 miles south-east).
Landmarks near Grosmont
Typical jobs here are in homes near Station Tavern and Church of St Matthew and Churchyard Gateway. There’s a railway station in Grosmont itself: Grosmont station. Further afield, we also cover the area around Whitby Hospital (5.3 miles north-east) and Mulgrave Castle (4 miles north).
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Aftercare tips
Nothing complicated is needed:
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
