Bradford · England
Bath re-enamelling & resurfacing in Denton, Bradford
Full bath re-enamelling and resurfacing for homes and businesses in Denton and across Bradford. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coating lifting around the plughole
- Wear marks under the taps
About our bath re-enamelling in Denton
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We are frequently asked to fix enamel that’s lost its shine and feels rough and thin, worn enamel in places, across acrylic baths, Victorian roll-tops and pressed steel baths.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Denton (LS29)
- Area hub
- Bradford
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Denton
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long is the bath unusable?
Typically one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Bradford.
What a repair cannot fix
We’d rather lose a job than do one that will not last, so these are the limits:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Denton. The price comes down to:
- Doing more than one item at once
- The material
- How much damage there is
- Any earlier repairs that need removing first
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
You can typically get a fixed quote without us visiting. To help us price it:
- Details of any past repairs
- Any details about the material
- One picture of the whole bath
- A coin beside the damage so we can judge size
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Also near Denton
More services for Denton
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Denton and the surrounding area
Denton is about 2 miles north-east of Ilkley, in Bradford. Whether you’re in the middle of Denton or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Denton is one of 140 places in Bradford where we work. Our nearest city page is Leeds, about 13 miles away.
We cover every part of LS29. Local streets include Smithy Lane and Denton Road, all of which we cover. We also travel to Ben Rhydding (1 mile south-west), Askwith (2 miles east), Stead (2 miles south), Burley in Wharfedale (2 miles south-east) and Weston (2 miles south-east). Further out, we also cover Bradford (10 miles south), Keighley (7 miles south-west), Bingley (6 miles south), Shipley (7 miles south), Baildon (6 miles south) and Great Horton (11 miles south).
Local landmarks in Denton
In Denton, that means homes near Church of St Helen and Ilkley Grammar School, among other places. For rail, the closest station is Ben Rhydding station, roughly 1.1 miles south-west of the centre. A little further out are Ilkley Coronation Hospital (1.7 miles south-west) and Manor House (1.9 miles south-west). Green spaces nearby include The Chevin.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why Denton customers choose us
- Rooms protected and left tidy
- Straight answers about what a repair can do
- No need to remove anything
- Free fixed quotes from pictures
Read our pricing or guide to resurfacing and replacement costs.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
The process
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Let us know which floor the room is on
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Read more
How to care for the repair
Looking after the surface is easy:
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
- Repair dripping taps early
Wipe the bath dry after use where you can, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Signs you need bath re-enamelling in Denton
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Customers generally contact us about:
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- Wear marks under the taps
- Staining under the taps and around the waste
What to look for in a quote
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- Aftercare advice
- What happens if the damage is worse than the pictures show
About our accreditations · Every repair comes with a one-year guarantee.
