Bradford · England
Bath Re-enamelling for Burley in Wharfedale homes
Full bath re-enamelling and resurfacing for homes and businesses in Burley in Wharfedale and across Bradford. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
About our bath re-enamelling in Burley in Wharfedale
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people contact us are a coloured bath you want in white and a peeling or bubbling previous coating.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Burley in Wharfedale (LS29)
- County
- Bradford
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Burley in Wharfedale
Hard water speeds up the wear, and abrasive cleaners do the most damage.
These are the problems we’re asked about most:
- Chips and rust in more than one place
- Thin, worn enamel in places
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
Questions to ask before booking
- What the guarantee covers, and for how long
- What aftercare is recommended
- Whether a trained technician does the job
- Whether the colour is mixed to match
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Usually one visit, start to finish
- Fixed prices from your pictures
- Honest advice, even when it means no job
- A year’s guarantee on all work
Read our pricing or bath cost comparison.
What happens on the day
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Point us to the nearest place to park
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say right away whether it can be repaired.
Related advice
What else we do in Burley in Wharfedale
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Our work in Burley in Wharfedale
Burley in Wharfedale is about 4 miles north-west of Yeadon, in Bradford. We visit clients in Burley in Wharfedale, so nothing has to leave your home. Burley in Wharfedale is one of 140 towns and villages in Bradford we cover. Our jobs stretch from Burley in Wharfedale to Leeds (11 miles away).
Our visits in LS29 work the same way as everywhere else we cover. From Station Road, Main Street and Scalebor Square or anywhere nearby, we can come to you. If you’re just outside Burley in Wharfedale, we cover Weston (1 mile north-east), Stead (1 mile west), Askwith (1 mile north), Ben Rhydding (2 miles north-west) and Denton (2 miles north-west). Further out, we also cover Bradford (8 miles south), Keighley (7 miles south-west), Bingley (5 miles south-west), Shipley (6 miles south), Baildon (4 miles south) and Great Horton (9 miles south).
Near you in Burley in Wharfedale
Locally, our jobs take us to homes close to St. Mary's Menston, Burley In Wharfedale Congregational Church and Burley Oaks Primary School and the streets around them. Burley in Wharfedale has its own railway station: Burley-In-Wharfedale station. A little further out are Manor House (3.1 miles west) and Scalebor Park Hospital (under half a mile south-west). For a walk, there is The Chevin and Yeadon Tarn.
Aftercare tips
So the finish stays in good condition for years:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Repair dripping taps early
- Get any chip repaired quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We look at:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- How many areas need work
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- Where you are, by postcode
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Your questions about bath re-enamelling in Burley in Wharfedale
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
What areas do you cover?
All of Bradford, and the rest of the UK. There is no extra charge for travel.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- A bath that is rusted through
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
