Gwynedd · Wales
Bath re-enamelling & resurfacing in Dinas, Gwynedd
Our repair technicians come to Dinas for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- Stains that won’t shift
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- The material and finish
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- What it’s made of, if you know
- One picture of the whole bath
- Any earlier repairs or coatings
- A close-up of the damage, in focus
Most customers in Dinas get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Bath re-enamelling at your home in Dinas
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with wear marks under the taps and stains that won’t shift, we can normally put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Dinas (LL53)
- County
- Gwynedd
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Open a window if you can
- Let us know which floor the room is on
Get a quote
Send us pictures of the damage and a wider shot of the whole item, with your LL53 postcode, and we’ll reply with a fixed quote.
Read more
FAQs for Dinas
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you cover the whole of Gwynedd?
Everywhere in the UK, Dinas included. There’s no extra charge for travel.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How much does bath re-enamelling cost in Dinas?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How long will the bath be out of use?
One day for most baths, ready the day after. We give you timings with the quote.
Aftercare tips
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Store bottles off the bath
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Dinas and the surrounding area
Dinas is about 21 miles south-west of Caernarfon, in Gwynedd. We travel to homes and businesses in Dinas, so nothing has to leave your home. We cover 165 places across Gwynedd. Our nearest city page is Liverpool, about 77 miles away.
Postcode districts we cover here: LL53. If you are just outside Dinas, we cover Botwnnog (3 miles south), Mynytho (4 miles south-east), Abersoch (6 miles south-east), Llanengan (6 miles south) and Sarn Bach (6 miles south). Within a short drive, we also cover Pwllheli (6 miles east), Morfa Nefyn (3 miles north), Criccieth (14 miles east), Pen-rallt (6 miles east) and Nefyn (4 miles north-east).
What’s near Dinas
Typical jobs here are in homes near St Tudwen's Church, among other places. Other landmarks nearby include Carn Fadryn castle and hillfort (0.8 miles south-east). Open spaces near Dinas include Carn Fadryn.
Landlord and trade work in Dinas
For anyone letting property in or around Dinas, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Places near Dinas
Other services in Dinas
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Common problems we fix in Dinas
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted any of these:
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
- Enamel that is lost its shine and feels rough
What to look for in a quote
- What prep work is covered
- What protection goes down before work starts
- Who turns up on the day
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
