Herefordshire · England
Bath Re-enamelling in Dinedor
Full bath re-enamelling and resurfacing in Dinedor, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Bath re-enamelling in Dinedor, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Typical jobs include a coloured bath you want in white and lots of chips and rust spots, in cast iron baths, pressed steel baths and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Dinedor (HR2)
- Area hub
- Herefordshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Dinedor
If you manage property in Dinedor, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in Herefordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Your questions about bath re-enamelling in Dinedor
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will the price change on the day?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a full day. Before leaving, we tell you how long to leave it and how to look after it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
How to get a price
Most clients in Dinedor get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
What bath re-enamelling costs
Prices start from £350. You will know the full cost before booking. We take into account:
- Unusual colours or finishes
- How many items we do on one visit
- What the surface is made of
- Access to the area
Our prices are the same across the UK, so there’s no premium for Dinedor. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- One picture of the entire bath
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Dust sheets down, tidy finish
- No need to remove anything
- Technicians who travel to you, UK-wide
- Normally one visit, start to finish
Take a look at our pricing and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Wipe the bath dry after use in hard water areas
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
- Repair dripping taps early
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
When a repair is not the answer
Before booking, it’s worth knowing the limits:
- Problems we can’t see until an old finish comes off
- A bath that is rusted through
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Dinedor and the surrounding area
Dinedor is about 3 miles south-east of Hereford, in Herefordshire. Anywhere in HR2, a technician comes to you. Dinedor is one of 255 places in Herefordshire we cover. Our jobs stretch from Dinedor to Birmingham (about 45 miles away).
Here we cover the HR2 postcode area. Main roads around Dinedor include the B4399, which makes travel easy. We also cover the places around Dinedor: Holme Lacy (1 mile south-east), Hampton Bishop (1 mile north-east), Tidnor (2 miles north-east), Eign Hill (2 miles north-west) and Tupsley (2 miles north). Larger places within reach include Hereford (3 miles north-west), Ross-on-Wye (9 miles south-east), Ledbury (10 miles east), Leominster (14 miles north), Redhill (3 miles north-west) and Newton Farm (3 miles west).
Near you in Dinedor
We visit homes around Church of St Andrew and The Bishop of Hereford's Bluecoat School, among other places. The nearest railway station is Hereford station, roughly 2.9 miles north-west. Other landmarks nearby include Williams' Hospital (2.4 miles north-west) and Hereford Castle (2.5 miles north-west). Not far away are Hampton Meadow and Dinedor Hill.
- Local facilities include South Herefordshire (2.8 miles south-west)
Also near Dinedor
Also in Dinedor
About our accreditations · Every repair comes with a one-year guarantee.
