Aberdeenshire · Scotland
Bath Re-enamelling for Dinnet homes
Problem with your bath in Dinnet? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Our work in Dinnet
Dinnet is about 24 miles south-west of Inverurie, in Aberdeenshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 161 places in Aberdeenshire. We work right across the region, from Dinnet to Edinburgh (about 79 miles away).
All of AB34 is covered, from the main roads to the quietest streets. Dinnet is on the B9158, so it’s easy for us to reach. Nearby, we also work in Aboyne (4 miles east), Tarland (4 miles north), Birsemore (4 miles east), Ballater (6 miles west) and Kincardine O'Neil (8 miles east). Larger places within reach include Banchory (15 miles east), Alford (13 miles north-east) and Torphins (10 miles east).
Landmarks near Dinnet
Typical jobs here are in homes near Dinnet Parish Church. Other landmarks nearby include Kinord Castle (1.4 miles north-west) and Aboyne Hospital (4.7 miles east). Not far away are Culblean Hill and Loch Kinord.
Bath re-enamelling at your home in Dinnet
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we don’t cut corners on it. We’re frequently asked to fix a coating lifting around the plughole and stains that won’t shift, across pressed steel baths, Victorian roll-tops and cast iron baths.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Dinnet (AB34)
- Region
- Aberdeenshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Dinnet. The price reflects:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The material
- Any earlier repairs that need removing first
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Natural light rather than flash
- One sharp close-up of the damage
- What it’s made of, if you know
- One picture of the whole bath
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Questions from Dinnet
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Also in Dinnet
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
Ask for a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
Landlords, agents and businesses in Dinnet
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
When to call us in Dinnet
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Common reasons people in Dinnet contact us are:
- Chips and rust in more than one place
- A roll-top that is seen better days
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
What to look for in a quote
- How your room will be protected
- What happens if the damage is worse than the photos show
- A fixed price, and whether VAT is included
- How to care for the finish
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- One-year guarantee on every repair
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- Generally one visit, start to finish
Read our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
