Aberdeenshire · Scotland
Bath Re-enamelling in Kincardine O'Neil
Full bath re-enamelling and resurfacing for homes and businesses in Kincardine O'Neil and across Aberdeenshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Kincardine O'Neil
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on Victorian roll-tops, pressed steel baths and basins & shower trays, and common reasons people contact us are a roll-top that’s seen better days and a coating lifting around the plughole.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Kincardine O'Neil (AB34)
- Area hub
- Aberdeenshire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Kincardine O'Neil?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Why book with us
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
See our prices page and bath cost comparison.
Common problems we fix in Kincardine O'Neil
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The most common problems we are called about are:
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- Stains that won’t shift
- A bath in a colour that no longer suits
Before you book anyone
- Whether the price covers travel
- How to care for the finish
- Who will actually do the work
- What happens if the damage is worse than the photos show
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
- Let us know which floor the room is on
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
FAQs for Kincardine O'Neil
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
How long will the bath be out of use?
Usually one day, with the bath ready the day after. A badly pitted bath can need a second day.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Steel that has corroded right through
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Landlords, agents and businesses in Kincardine O'Neil
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Where we work around Kincardine O'Neil
Kincardine O'Neil is about 18 miles south-west of Inverurie, in Aberdeenshire. Our technicians come to homes and businesses in Kincardine O'Neil and nearby villages, so nothing has to leave your home. Kincardine O'Neil is one of 161 places in Aberdeenshire we cover.
Jobs in AB34 are booked in the same way as anywhere else. Jobs here include addresses on North Deeside Road, Neil Burn Drive and Old Military Road. Other places close to Kincardine O'Neil include Potarch (2 miles south-east), Torphins (2 miles north-east), Lumphanan (3 miles north), Birsemore (4 miles west) and Aboyne (4 miles west). We also work in nearby towns such as Westhill (15 miles east), Banchory (7 miles east), Kemnay (13 miles north-east), Alford (10 miles north), Ballater (14 miles west) and Elrick (15 miles east).
Landmarks near Kincardine O'Neil
Locally, our jobs take us to homes close to Kincardine O'Neil and the streets around them. Further afield, we also cover the area around Kincardine O'Neil Hospital (under half a mile south) and Peel of Lumphanan (2.7 miles north). Open spaces near Kincardine O'Neil include Mortlich and Loch of Aboyne.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Aftercare tips
To keep it looking its best:
- Wash away dyes and oils after use
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Also in Kincardine O'Neil
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
