Kirklees · England
Bath Re-enamelling in Drub
Bath re-enamelling in Drub without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Drub
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We are often asked to fix a dull, rough surface that won’t come clean and a peeling or bubbling previous coating, on basins & shower trays, acrylic baths and cast iron baths.
You get a one-year guarantee, the same in Drub as everywhere else we work.
- Where
- Drub (BD19)
- County
- Kirklees
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
More services for Drub
What affects the price in Drub
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Drub. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
Two or three clear pictures are typically enough. Try to include:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Repairing versus replacing in Drub
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
- Normally one visit, start to finish
- Straight answers about what a repair can do
Read our prices page and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Signs you need bath re-enamelling in Drub
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- A dull, rough surface that will not come clean
What your quote should include
- If travel is included in the price
- The length of the guarantee and what it covers
- Whether they match the colour on site
- Aftercare advice
About Drub
Drub is about 1 mile north-east of Cleckheaton, in Kirklees. Our technicians come to clients in Drub, so nothing has to leave your home. We work in all 189 towns and villages across Kirklees, from the larger towns to small villages. We work right across the region, from Drub to Leeds (about 8 miles away).
Our repair technicians cover all of the BD19 postcode area and the streets around it. We also cover the places around Drub: Hunsworth (1 mile west), Cleckheaton (1 mile south-west), East Bierley (1 mile north), Oakenshaw (2 miles north-west) and Hightown Heights (2 miles south-west). We also work in nearby towns such as Huddersfield (7 miles south-west), Dewsbury (4 miles south-east), Batley (3 miles south-east), Mirfield (4 miles south), Meltham (12 miles south-west) and Staincliffe (3 miles south-east).
Local landmarks in Drub
Locally, our jobs take us to homes close to BBG Academy, Gomersal Primary School and Savile Arms Public House, among other places. Drub’s nearest station is Low Moor station, roughly 2.2 miles west of the centre. Further afield, we also cover the area around Oakwell Hospital (2.1 miles east) and Transperience (2.1 miles north-west). Green spaces nearby include Post Hill.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Rinse off hair dye, oils and bath bombs immediately
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
How it works
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for most of the day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Open a window if you can
- Keep children and pets away from the room on the day
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Your questions about bath re-enamelling in Drub
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Kirklees.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
About our accreditations · Every repair comes with a one-year guarantee.
