Kirklees · England
Bath re-enamelling & resurfacing in Hartshead Moor Side, Kirklees
Damaged bath in Hartshead Moor Side? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Hartshead Moor Side
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Common call-outs are for a dull, rough surface that won’t come clean and an old resurfacing that’s failing, in basins & shower trays, cast iron baths and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Hartshead Moor Side (BD19, WF15)
- Area hub
- Kirklees
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Advice
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
How to care for the repair
Once the work has cured, treat it gently:
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What a repair cannot fix
It helps to know what we cannot do too:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Your questions about bath re-enamelling in Hartshead Moor Side
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you resurface freestanding baths?
Yes. Inside and out.
Do you work in Hartshead Moor Side?
Yes. We cover the entire UK and travel to Hartshead Moor Side. Send photos and we’ll quote, or call 0345 017 0787.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
- Everything repaired in place
- Free fixed quotes from pictures
See our full price list or guide to resurfacing and replacement costs.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Places near Hartshead Moor Side
Also in Hartshead Moor Side
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job. The main factors are:
- What the surface is made of
- How much damage there is
- Whether we combine several jobs
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
When you take your photos, a few simple things make all the difference:
- A picture taken from further back
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- Something in shot to show the size
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Where we work around Hartshead Moor Side
Hartshead Moor Side is about 1 mile south-west of Cleckheaton, in Kirklees. Wherever you are in the BD19 postcode area, a technician comes to you. Hartshead Moor Side is one of 189 places in Kirklees we cover. We work right across the region, from Hartshead Moor Side to Leeds (about 10 miles away).
Our visits in BD19 and WF15 are booked in the same way as anywhere else. Whether you live on New Lane, Halifax Road and Lark Hill Avenue or anywhere nearby, we can come to you. You’ll find Hartshead Moor Side on the A649, so it’s easy for us to reach. Close by, we cover Hightown Heights (1 mile south-east), Hartshead Moor Top (1 mile west), Scholes (1 mile north-west), Hightown (1 mile south-east) and Cleckheaton (1 mile north-east). We also work in nearby towns such as Huddersfield (5 miles south-west), Dewsbury (5 miles south-east), Batley (4 miles east), Mirfield (3 miles south-east), Heckmondwike (3 miles east) and Meltham (10 miles south-west).
Around Hartshead Moor Side
Our clients here include homes close to High Bank Junior Infant and Nursery School, Church of St Luke and The Priory at Whitechapel pub, among other places. The closest station to Hartshead Moor Side is Low Moor station, roughly 2.2 miles north. A little further out are Transperience (2.4 miles north) and Dewsbury and District Hospital (3.7 miles east).
Signs you need bath re-enamelling in Hartshead Moor Side
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
These are the problems we are asked about most:
- Worn patches where water runs and sits
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
What your quote should include
- How to care for the finish
- Whether cleaning and preparation are in the price
- Who will actually do the work
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
