Nottinghamshire · England

Bath Re-enamelling in Dry Doddington

Damaged bath in Dry Doddington? We repair it in place, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Dry Doddington

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

How we handle bath re-enamelling in Dry Doddington

Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. We are often asked to fix a peeling or bubbling previous coating and a coloured bath you want in white, on Victorian roll-tops, acrylic baths and basins & shower trays.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Technician in a mask working on a freestanding roll-top bath
Where
Dry Doddington (NG23)
Area hub
Nottinghamshire
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

Signs you need bath re-enamelling in Dry Doddington

Often the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.

If you can see any of these, send us a photo:

  • A dull, rough surface that won’t come clean
  • A peeling or bubbling previous coating
  • Stains that will not shift
  • An original cast iron bath that needs restoring

What your quote should include

  • Who turns up on the day
  • How long the guarantee is and what it covers
  • Whether the price is fixed and includes VAT
  • Whether there are any call-out or travel charges

10 questions to ask before booking

FAQs for Dry Doddington

Is it OK to have pets in the house?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes. Stripping the old coating adds time, so it’s reflected in the quote.

How long is the bath unusable?

One day for most baths and can be used the day after. We will confirm timings when we quote.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Is there any odour?

There may be a mild smell during the work.

Can you quote from pictures?

Nearly always. If photos do not show enough, we’ll ask for another angle.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Why repair rather than replace?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Dry Doddington clients choose us

  • We leave the room as we found it
  • Free fixed quotes from pictures
  • Honest advice, even when it means no job
  • Work done at your home or business

Read our pricing or resurfacing vs replacement cost guide.

Honest limits

To be straight with you, some problems need a different fix:

  • Acrylic that moves when you stand in it
  • A metal bath with a through crack
  • Holes rusted through the metal

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Dry Doddington

  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • A quick wipe after use keeps limescale away
  • Rinse off hair dye, oils and bath bombs immediately
  • Fix dripping taps quickly
  • Stick to gentle, non-abrasive cleaners

Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

What happens on the day

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Preparing for the visit

  • Let us know about parking or access
  • Make sure the room can be ventilated
  • Mention any earlier repairs or resurfacing

Getting a price

To get a price, send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a fixed quote

Related advice

Landlords, agents and businesses in Dry Doddington

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Landlords, letting agents and housing providers in Dry Doddington use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Can I fix it myself?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

About Dry Doddington

Dry Doddington is about 5 miles south-east of Newark-on-Trent, in Nottinghamshire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. Dry Doddington is one of 329 towns and villages in Nottinghamshire where we work. Our nearest city page is Birmingham, about 61 miles away.

Jobs in NG23 are booked in the same way as anywhere else. Whether you live on Main Street, Green Lane and Summerfield Close or anywhere nearby, we can come to you. Neighbouring places we cover include Westborough (1 mile south), Claypole (1 mile north), Long Bennington (2 miles south-west), Stubton (2 miles north-east) and Foston (2 miles south). Within a short drive, we also cover Carlton (15 miles west), Newark-on-Trent (5 miles north-west), Netherfield (15 miles west), Bingham (10 miles south-west), Radcliffe on Trent (13 miles west) and Balderton (4 miles north-west).

Around Dry Doddington

Around Dry Doddington, we work in homes near Church of St James, among other places. A little further out are Holme Spinney (3.5 miles north-east) and Newark Hospital (5 miles north-west).

Map of Dry Doddington © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.