Trafford · England
Bath Re-enamelling in Dunham Town
Local bath re-enamelling for Dunham Town: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A roll-top that’s seen better days
How we handle bath re-enamelling in Dunham Town
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We’re often asked to fix an old resurfacing that’s failing and a dull, rough surface that won’t come clean, in acrylic baths, basins & shower trays and pressed steel baths.
All our work comes with a one-year guarantee.
- Location
- Dunham Town (WA14)
- Area hub
- Trafford
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Dunham Town. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- The material
- Previous DIY repairs that have to come out
- How much damage there is
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
You can usually get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- The material, if you know it
- A clear, close picture of the problem area
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
What happens on the day
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Getting a price
To get a price, send a couple of pictures using our quote form or call us. We will say immediately if a repair is the right fix.
Related advice
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before you book.
What we work on
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
What we’re called out for in Dunham Town
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Send us a photo if you notice any of these:
- Worn patches where water runs and sits
- Stains that will not shift
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Comparing quotes
- The length of the guarantee and what it covers
- Who will actually do the work
- Whether the price covers travel
- What happens if they find more damage
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Where we work around Dunham Town
Dunham Town is about 2 miles west of Altrincham, in Trafford. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover 25 places in Trafford, from the larger towns to small villages. We work right across the region, from Dunham Town to Manchester (about 10 miles away).
Here we cover the WA14 postcode area. From School Lane, Little Heath Lane and Woodhouse Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Bowdon (1 mile south-east), West Timperley (2 miles east), Altrincham (2 miles east), Rostherne (3 miles south) and Timperley (3 miles east). Within a short drive, we also cover Sale (4 miles north-east), Urmston (5 miles north), Stretford (6 miles north-east), Davyhulme (5 miles north), Partington (3 miles north-west) and Brooklands (3 miles north-east).
Around Dunham Town
Locally, our jobs take us to homes close to Altrincham Grammar School for Girls, Swan with Two Nicks pub and Oldfield Brow Primary School and the streets around them. For rail, the closest station is Altrincham station, about 1.9 miles east of the centre. Nearby you will also find Lymm Heritage Centre (3.5 miles west) and Altrincham General Hospital (1.7 miles east). For a walk, there’s Black Moss Covert Nature Reserve.
- Parks and local facilities nearby include Bowdon Urban District (1.4 miles south-east)
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Towns and villages near Dunham Town
More services for Dunham Town
Common questions in Dunham Town
Do you come to Dunham Town?
Yes, we do. We send a technician to Dunham Town for every job, with no extra charge for travel.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
How do I get a price for bath re-enamelling in Dunham Town?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item with your WA14 postcode.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
