Central Bedfordshire · England
Bath Re-enamelling in Dunstable
Full bath re-enamelling and resurfacing at your home in Dunstable, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that’s seen better days
- Staining under the taps and around the waste
How we handle bath re-enamelling in Dunstable
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s a bath that stays dull however much you clean it and a coloured bath you want in white, we can usually put it right, on cast iron baths, Victorian roll-tops and basins & shower trays alike.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Dunstable (LU6, LU5)
- County
- Central Bedfordshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Dunstable
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for most of the day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
- Ensure the area is dry
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- Any earlier repairs that need removing first
- How many areas need work
- How easy the damage is to reach
We charge the same wherever you are, so there is no premium for Dunstable. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Before you send pictures, these tips help us give you a firm price:
- One picture of the entire bath
- What it’s made of, if you know
- Any earlier repairs or coatings
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
How to care for the repair
How the surface is treated afterwards matters:
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Dunstable and the surrounding area
Dunstable is about 4 miles west of Luton, in Central Bedfordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover all 121 towns and villages across Central Bedfordshire. Our jobs stretch from Dunstable to London (32 miles away).
All of LU6 and LU5 is within our area. Streets in the area include The Square, Staines Square and High Street South. Dunstable sits on or near the A505 and B489, so getting to you is simple. We also travel to Well Head (1 mile south-west), Sewell (2 miles north-west), Totternhoe (2 miles west), Whipsnade (2 miles south) and Kensworth (2 miles south). We also work in nearby towns such as Leighton Buzzard (6 miles west), Flitwick (8 miles north), Linslade (7 miles north-west), Shefford (13 miles north-east), Ampthill (10 miles north) and Lower Stondon (12 miles north-east). Dunstable is among the bigger towns we cover in Central Bedfordshire.
Around Dunstable
Around Dunstable, we work in homes near Ashton (VA) Middle School, The Plume Of Feathers Public House and Dunstable Icknield Lower School and the streets around them. Other local landmarks include Roman Catholic Church of St Mary (less than half a mile north-west) and Dunstable Downs (1.4 miles south-west). Dunstable’s nearest station is Leagrave station, roughly 3.1 miles north-east. Further afield, we also cover the area around Luton and Dunstable Hospital (2.2 miles east) and South Bedfordshire (2.5 miles north-west). Open spaces near Dunstable include Ivinghoe Beacon and Lancot Meadow.
Towns and villages near Dunstable
Also in Dunstable
When to call us in Dunstable
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
- An original cast iron bath that needs restoring
Before you book anyone
- Who turns up on the day
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Aftercare advice
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Common questions in Dunstable
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Which areas do you work in?
Everywhere in the UK, Dunstable included. There’s no extra charge for travel.
Do you cover Dunstable?
Yes. We work across the UK and travel to Dunstable. Send us pictures for a fixed quote, or call 0345 017 0787.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
About our accreditations · Every repair comes with a one-year guarantee.
