Essex · England

Bath Re-enamelling in Earls Colne

Fixed-price bath re-enamelling in Earls Colne and the surrounding area, typically in one visit.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Earls Colne homes

Landlord and trade work in Earls Colne

Housing associations and facilities teams use us for planned and reactive repairs in Essex and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

How we handle bath re-enamelling in Earls Colne

When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and common reasons people contact us are an outdated colour you’d like to change and a bath that stays dull however much you clean it.

A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.

Where
Earls Colne (CO6)
Region
Essex
Warranty
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Earls Colne questions

Is it OK to have pets in the house?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Is the work guaranteed?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

Do you work in Earls Colne?

We do. We send a technician to Earls Colne for every job, and the price is the same as everywhere else.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens next?

We come back with a fixed price. You’re under no obligation.

Are there extra charges for Earls Colne?

Travel is included in the price, with the same prices everywhere we work.

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Common problems we fix in Earls Colne

Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

You may need us if you’ve spotted any of these:

  • An original cast iron bath that needs restoring
  • Chips and rust in more than one place
  • Brown or grey marks that don’t clean off
  • Worn patches where water runs and sits

Comparing quotes

  • Aftercare advice
  • Whether they match the colour on site
  • Whether there are any call-out or travel charges
  • What happens if the damage is worse than the pictures show

How to compare quotes

Should you replace it?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Same prices wherever you are
  • Honest advice, even when it means no job
  • Work done at your home or business
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing or guide to resurfacing and replacement costs.

How to care for the repair

Aftercare is simple, and it makes a real difference:

  • Repair dripping taps early
  • Keep toiletries on a shelf rather than in the bath
  • Wash away dyes and oils after use
  • Avoid suction-cup mats

Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

What we do, step by step

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Make sure the area is dry
  • Ensure the room can be ventilated
  • Clear the area around the damage

Ask for a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Read more

When we would advise against a repair

To be straight with you, some problems need a different fix:

  • Acrylic that moves when you stand in it
  • Damage hidden under a previous coating, until it’s stripped back
  • Holes rusted through the metal

Not sure? Send pictures and we will give you a straight answer.

Materials we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

About Earls Colne

Earls Colne is about 3 miles east of Halstead, in Essex. From the centre of Earls Colne to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 644 towns and villages in Essex, from the larger towns to small villages. Our nearest city page is London, about 45 miles away.

Postcode districts we cover here: CO6. We regularly work on streets such as High Street, Station Road and Foundry Lane. If you’re just outside Earls Colne, we cover Colne Engaine (1 mile north), Greenstead Green (2 miles west), Halstead (3 miles west), Pebmarsh (3 miles north) and Little Maplestead (4 miles north-west). Within a short drive, we also cover Colchester (9 miles east), Braintree (7 miles south-west), Maldon (14 miles south), Witham (9 miles south), Camulodunum (8 miles east) and Great Dunmow (15 miles west).

Around Earls Colne

In Earls Colne, that means homes near Brickfield and Long Meadow, Earls Colne Primary School and Nursery and Parish Church of St Andrew. For rail, the closest station is Chappel & Wakes Colne station, roughly 2.6 miles east. A little further out are Halstead Hospital (2.9 miles north-west) and Mount Bures (3.8 miles north-east). Open spaces near Earls Colne include Belcher's and Broadfield Woods.

Map of Earls Colne © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.