Essex · England
Bath Re-enamelling for Pebmarsh homes
Full bath re-enamelling and resurfacing for homes and businesses in Pebmarsh and across Essex. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that won’t shift

Bath re-enamelling at your home in Pebmarsh
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We work on pressed steel baths, basins & shower trays and acrylic baths, and people most often call us about an old resurfacing that’s failing and lots of chips and rust spots.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Pebmarsh (CO9)
- Area hub
- Essex
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026

Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Places near Pebmarsh
More services for Pebmarsh
Signs you need bath re-enamelling in Pebmarsh
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Before you book anyone
- Who turns up on the day
- How your room will be protected
- How the colour is matched
- How soon you can use it again
What affects the price in Pebmarsh
Resurfacing from £350. We charge the same across the UK, including Pebmarsh. What changes the price is:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Access to the area
- What the surface is made of
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Something in shot to show the size
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Pebmarsh and the surrounding area
Pebmarsh is about 3 miles north-east of Halstead, in Essex. We visit customers in Pebmarsh and the surrounding area, so nothing has to leave your home. Pebmarsh is one of 644 towns and villages in Essex we cover. We work right across the region, from Pebmarsh to London (47 miles away).
We cover every part of the CO9 postcode area and the streets around it. That includes homes on The Street and Water Lane and the roads around them. We also cover the places around Pebmarsh: Little Maplestead (2 miles west), Colne Engaine (2 miles south), Wickham St Paul (2 miles north-west), Great Maplestead (3 miles west) and Earls Colne (3 miles south). Further out, we also cover Colchester (10 miles south-east), Braintree (8 miles south-west), Witham (12 miles south), Camulodunum (9 miles south-east), Greenstead (12 miles south-east) and Tiptree (11 miles south).
Landmarks near Pebmarsh
Our clients here include homes close to The King's Head Public House and Parish Church of St John the Baptist, among other places. Pebmarsh’s nearest station is Bures station, about 3 miles east of the centre. Further afield, we also cover the area around Halstead Hospital (2.9 miles south-west) and Bung Chapel Museum (3.3 miles south-west). Not far away are Sergeants Orchard.
- Other local spots include Belchamp Rural District (2.1 miles north)
Aftercare tips
Simple care helps the repair last. Our advice:
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Landlords, agents and businesses in Pebmarsh
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Questions from Pebmarsh
What happens next?
We come back with a fixed price. There is no obligation to book.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Repair or replace in Pebmarsh?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Fixed prices from your pictures
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Colour mixed on the day to match
See our pricing or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.

