Surrey · England
Bath re-enamelling & resurfacing in Earlswood, Surrey
Bath re-enamelling across Earlswood and nearby, usually in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Earlswood
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the next day. Whether it’s thin, worn enamel in places and several chips and rust patches, we can normally put it right.
Big or small, you get the same one-year guarantee in Earlswood and across Surrey.
- Where
- Earlswood (RH1, RH2)
- Area hub
- Surrey
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Towns and villages near Earlswood
Other services in Earlswood
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What we can’t put right
Before booking, it’s worth knowing the limits:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Same prices wherever you are
- Nothing taken out or refitted
- Most jobs done in one visit
- Free fixed quotes from pictures
See our prices page and bath cost comparison.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Earlswood. The price comes down to:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- What the surface is made of
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send photos for a quote
You can normally get a fixed price without us visiting. To help us price it:
- Any earlier repairs or coatings
- Any details about the material
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Upload a picture of the damage and a wider shot of the whole item, and tell us you’re in Earlswood, and we’ll reply with a fixed price.
Where we work around Earlswood
Earlswood is about 1 mile south of Redhill, in Surrey. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 395 towns and villages in Surrey. We work right across the region, from Earlswood to London (about 19 miles away).
Jobs in RH1 and RH2 are booked in the same way as anywhere else. From Brook Road, Ifold Road and Emlyn Road or anywhere nearby, a technician can come to you. Earlswood is on the A23, so it’s easy for us to reach. Other places close to Earlswood include Meadvale (1 mile west), Redhill (1 mile north), South Earlswood (1 mile south), South Nutfield (2 miles east) and Holmethorpe (2 miles north). Further out, we also cover Epsom (9 miles north-west), Horley (3 miles south), Ewell (9 miles north-west), Walton-on-Thames (15 miles north-west), Caterham (5 miles north-east) and Dorking (7 miles west).
Around Earlswood
Typical jobs here are in homes near The Flying Scud pub, Dunottar School and St John's Primary School, among other places. Other local landmarks include Earlswood Common (0.5 miles south-west), Hooley Mission Hall (less than half a mile east) and Reigate School (1 mile west). There is a railway station in Earlswood itself: Earlswood (Surrey) station. A little further out are The Belfry (0.9 miles north) and Surrey Fire Museum (1.5 miles north-west). The countryside around Earlswood includes Colley Hill and Reigate Heath.
Earlswood questions
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Do you work in Earlswood?
Yes. We work across the UK and come to Earlswood and the rest of Surrey. Send photos and we’ll quote, or call 0345 017 0787.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Earlswood.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
About our accreditations · Every repair comes with a one-year guarantee.
