Surrey · England
Bath re-enamelling & resurfacing in Salfords, Surrey
Problem with your bath in Salfords? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
About our bath re-enamelling in Salfords
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with thin, worn enamel in places and stains that won’t shift, we can generally put it right, on basins & shower trays, Victorian roll-tops and cast iron baths alike.
Whatever the size of the job, you get the same one-year guarantee in Salfords and across Surrey.
- Location
- Salfords (RH1)
- Area hub
- Surrey
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Salfords questions
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Surrey.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
How do I get a price for bath re-enamelling in Salfords?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Common problems we fix in Salfords
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
- Staining under the taps and around the waste
Questions to ask before booking
- Who will actually do the work
- How long the guarantee is and what it covers
- What aftercare is recommended
- How changes to the job are handled
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether we combine several jobs
- Unusual colours or finishes
- Any earlier repairs that need removing first
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
How to get a fixed quote
Good photos mean an accurate price. Here’s what helps:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One picture of the whole bath
- The postcode, so we can plan the visit
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
If you manage property in Salfords, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Repair or replace in Salfords?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why book with us
- A year’s guarantee on all work
- We leave the room as we found it
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing and resurfacing vs replacement cost guide.
Where we work around Salfords
Salfords is about 2 miles north of Horley, in Surrey. From the centre of Salfords to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 395 towns and villages in Surrey. You can also see our page for London, about 21 miles away.
All of RH1 is covered. Local streets include Salbrook Road, Napier Close and Mead Avenue, all of which we cover. If you’re just outside Salfords, we cover South Earlswood (1 mile north), Earlswood (2 miles north), Meadvale (2 miles north-west), South Nutfield (2 miles north-east) and Redhill (3 miles north). Further out, we also cover Epsom (10 miles north-west), Ewell (11 miles north), Reigate (3 miles north-west), Caterham (7 miles north-east), Dorking (7 miles west) and Ashtead (10 miles north-west).
Landmarks near Salfords
Locally, our jobs take us to homes close to Salfords Primary School, Oakwood School and Christ the King and the streets around them. Salfords has its own railway station: Salfords station. Further afield, we also cover the area around Reigate Castle (3.2 miles north-west) and Reigate Priory Museum (3 miles north-west). Green spaces nearby include Mercers Lake and Colley Hill.
Places near Salfords
What else we do in Salfords
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A metal bath with a through crack
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
How to care for the repair
Simple care helps the repair last. Our advice:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
- Repair dripping taps early
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
The process
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes the best part of a day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Clear the area around the damage
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
