North Yorkshire · England

Bath re-enamelling & resurfacing in Easingwold, North Yorkshire

Bath re-enamelling for Easingwold, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Easingwold

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

About our bath re-enamelling in Easingwold

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s a coating lifting around the plughole and enamel that’s lost its shine and feels rough, we can help, whatever the material.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Where
Easingwold (YO61)
Region
North Yorkshire
Cover
One year on every repair
Quotes
From £350. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Landlord and trade work in Easingwold

For anyone letting property in or around Easingwold, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

What we do, step by step

Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes the best part of a day, and we will keep you posted as we go.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the day after, the bath is ready.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available

Ask for a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Send pictures for a quote

Related advice

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Repair dripping taps early
  • Clean with a soft cloth and mild detergent
  • Keep toiletries on a shelf rather than in the bath
  • Get any chip repaired quickly

Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.

Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.

Common questions in Easingwold

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before and we’ll plan for it.

Is my repair covered?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.

Can I get a quote without a visit?

Nearly always. If photos do not show enough, we will ask for another angle.

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

What a repair cannot fix

In fairness, there are a few things a repair will not fix:

  • Steel that has corroded right through
  • An acrylic bath that flexes badly underfoot
  • Leaks from fittings rather than the bath

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

How we price bath re-enamelling

Resurfacing from £350. Every quote is fixed and free. What we take into account:

  • Any earlier repairs that need removing first
  • The colour and finish to match
  • The material
  • How much damage there is

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

Most quotes are done from photos alone. To help us price it:

  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size

To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.

Signs you need bath re-enamelling in Easingwold

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

The most common problems we’re called about are:

  • An outdated colour you’d like to change
  • An original cast iron bath that needs restoring
  • Brown or grey marks that do not clean off
  • Worn patches where water runs and sits

Questions to ask before you book

  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?
  • Who will actually do the work
  • How the room is protected while they work

How to compare quotes

Easingwold and the surrounding area

Easingwold is about 12 miles north of York, in North Yorkshire. Our repair technicians come to customers in Easingwold and the surrounding area, so you don’t need to take anything anywhere. We cover all 626 towns and villages in North Yorkshire. We work right across the region, from Easingwold to Leeds (26 miles away).

Our visits in YO61 are booked in the same way as anywhere else. You’ll find streets such as Market Place, Croft Close and Paradise Field Estate, all of which we cover. We also travel to Crayke (2 miles east), Stillington (4 miles east), Oulston (4 miles north-east), Yearsley (5 miles north-east) and Coxwold (5 miles north). Larger places within reach include Knaresborough (13 miles south-west), Ripon (14 miles west), Starbeck (15 miles south-west), Thirsk (10 miles north-west), Sowerby (10 miles north-west) and Boroughbridge (9 miles west).

Near you in Easingwold

Typical jobs here are in homes near St John and All Saints' Church, The York pub and Outwood Academy Easingwold.

Map of Easingwold © OpenStreetMap contributors

Repair or replace: which is better?

A replacement often means several trades over several days. Resurfacing takes one technician and usually a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Rooms protected and left tidy
  • Everything repaired in place
  • Colour mixed on the day to match
  • Repair technicians who travel to you, UK-wide

See our pricing and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.