North Yorkshire · England
Bath Re-enamelling for Yearsley homes
We travel to Yearsley for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
Bath re-enamelling in Yearsley without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on cast iron baths, Victorian roll-tops and acrylic baths, and the jobs we see most are wear marks under the taps and a coating lifting around the plughole.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Yearsley (YO61)
- Region
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Towns and villages near Yearsley
More services for Yearsley
What we can’t put right
We would rather lose a job than do one that will not last, so these are the limits:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Get any chip repaired quickly
- Wash away dyes and oils after use
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- A picture taken from further back
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Common questions in Yearsley
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before.
How much does bath re-enamelling cost in Yearsley?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you cover the whole of North Yorkshire?
We work UK-wide. Prices don’t change with location.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Yearsley and the surrounding area
Yearsley is about 14 miles north of York, in North Yorkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Yearsley is one of 626 places in North Yorkshire where we work. Our nearest city page is Leeds, about 30 miles away.
Our visits in YO61 are booked in the same way as anywhere else. If you’re just outside Yearsley, we cover Oulston (1 mile west), Ampleforth (2 miles north), Crayke (3 miles south-west), Coxwold (4 miles north-west) and Stillington (4 miles south). Within a short drive, we also cover Malton (12 miles east), Pickering (14 miles north-east), Thirsk (11 miles north-west), Norton-on-Derwent (13 miles east), Sowerby (11 miles west) and Boroughbridge (13 miles south-west).
Landmarks near Yearsley
We visit homes around Former Wombell Arms and Church of Holy Trinity. Well-known places in the area include Gilling Castle (2.1 miles north-east).
Repair or replace in Yearsley?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Prices start from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
Why Yearsley customers choose us
- We come to you, anywhere in the UK
- Colour mixed on the day to match
- A fixed quote before booking
- CHAS and Constructionline accredited
See our prices page or bath cost comparison.
What we’re called out for in Yearsley
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Signs it’s time to call us include:
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A coloured bath you want in white
- Wear marks under the taps
Questions to ask before you book
- How to look after the finish
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Let us know about parking or access
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
