Norfolk · England
Bath Re-enamelling in East Runton
Full bath re-enamelling and resurfacing at your home in East Runton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to East Runton. The price depends on:
- The material
- Any earlier repairs that need removing first
- How hard the colour is to match
- How much damage there is
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
You can normally get a fixed price without us visiting. To make it quick:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Bath re-enamelling in East Runton without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s thin, worn enamel in places and several chips and rust patches, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in East Runton and across Norfolk.
- Area
- East Runton (NR27)
- Region
- Norfolk
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near East Runton
What else we do in East Runton
Common problems we fix in East Runton
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- Wear marks under the taps
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
Questions to ask before you book
- How soon you can use it again
- How the colour is matched
- Whether there are any call-out or travel charges
- What happens if they find more damage
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Your questions about bath re-enamelling in East Runton
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
How do I get a price for bath re-enamelling in East Runton?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there any odour?
Expect a mild smell while we are working.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Our work in East Runton
East Runton is about 9 miles north-west of North Walsham, in Norfolk. Our repair technicians come to homes and businesses in East Runton and nearby villages, so nothing has to leave your home. We cover 797 places across Norfolk.
Jobs in NR27 work the same way as everywhere else we cover. Whether you live on High Street, Felbrigg Road and Incleborough Close or anywhere nearby, a technician can come to you. If you’re just outside East Runton, we cover West Runton (1 mile west), Aylmerton (1 mile south-west), Felbrigg (2 miles south), Beeston Regis (2 miles west) and Sheringham (3 miles west). We also work in nearby towns such as North Walsham (9 miles south-east), Aylsham (10 miles south), Holt (8 miles west), Mundesley (8 miles south-east), Stalham (15 miles south-east) and Reepham (13 miles south-west).
Near you in East Runton
Our clients here include homes close to The Church of Saint Andrew, Cromer Academy and Cliftonville Hotel, among other places. The closest station to East Runton is Cromer station, roughly 0.9 miles east of the centre. Nearby you will also find Cromer Hospital (1.8 miles east) and Cromer Museum (1.3 miles east). Open spaces near East Runton include Beacon Hill.
Landlords, agents and businesses in East Runton
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
How it works
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. Allow the best part of a day, and we’ll keep you posted as we go.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
