Kent · England

Bath re-enamelling & resurfacing in Eastling, Kent

Damaged bath in Eastling? We repair it in place, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Eastling

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Bath re-enamelling at your home in Eastling

Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Our repair technicians work on acrylic baths, Victorian roll-tops and pressed steel baths, and common reasons people get in touch are a peeling or bubbling previous coating and chips and rust in more than one place.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Eastling (ME13)
County
Kent
Cover
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

Our work in Eastling

Eastling is about 4 miles south-west of Faversham, in Kent. Across the ME13 area, we carry out the work at your property. We cover all 922 towns and villages in Kent, from the larger towns to small villages. You can also see our page for London, about 42 miles away.

All of ME13 is within our area, from the main roads to the quietest streets. You’ll find streets such as The Street, Meeson's Close and Eastling Road, and we cover them all. Close by, we cover The Valley (2 miles south), Throwley (2 miles south-east), Throwley Forstal (2 miles south-east), Painter's Forstal (2 miles north-east) and Stalisfield Green (2 miles south). We also work in nearby towns such as Maidstone (12 miles west), Ashford (10 miles south), Canterbury (12 miles east), Sittingbourne (6 miles north-west), Whitstable (11 miles north-east) and Faversham (4 miles north-east).

Landmarks near Eastling

Locally, our jobs take us to homes close to Church of St Mary, Doddington Place Gardens and Eastling Primary School, among other places. Eastling’s nearest station is Teynham station, about 3.9 miles north of the centre. A little further out are Newnham Castle (0.9 miles north-west).

Map of Eastling © OpenStreetMap contributors

FAQs for Eastling

Do you cover Eastling?

Yes, we do. Repair technicians travel to Eastling from across the region, with no extra charge for travel.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Do you cover the entire of Kent?

We work UK-wide, so Eastling is covered. Prices don’t change with location.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Repair or replace in Eastling?

If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

What you get with us

  • We leave the room as we found it
  • Work done at your home or business
  • No need to remove anything
  • Honest advice, even when it means no job

Read our pricing and bath cost comparison.

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

Signs you need bath re-enamelling in Eastling

Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Most people contact us after spotting something like this:

  • A coating lifting around the plughole
  • Enamel that’s lost its shine and feels rough
  • An outdated colour you’d like to change
  • Thin, worn enamel in places

What to look for in a quote

  • Whether the colour is mixed to match
  • What the guarantee covers, and for how long
  • How soon you can use it again
  • Who turns up on the day

Choosing a repair company

When a repair is not the answer

To be straight with you, some problems need a different fix:

  • A bath that’s rusted through
  • Problems we can’t see until an old finish comes off
  • A cast iron or steel bath that’s cracked right through

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we’re done and tell you when it’s ready to use.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let us know which floor the room is on
  • Make sure the room can be ventilated

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.

Get a fixed price

Read more

Landlords, agents and businesses in Eastling

We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Keeping it looking good

To keep it looking its best:

  • Wash away dyes and oils after use
  • Keep toiletries on a shelf rather than in the bath
  • Never use suction bath mats
  • Fix dripping taps quickly

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.