Kent · England
Bath Re-enamelling for Stalisfield homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Stalisfield. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Stalisfield without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with several chips and rust patches and enamel that’s lost its shine and feels rough, we can generally put it right, on acrylic baths, pressed steel baths and basins & shower trays alike.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Stalisfield (ME13)
- Region
- Kent
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What we do, step by step
You do not need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes a full day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
Our work in Stalisfield
Stalisfield is about 6 miles south-west of Preston, in Kent. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Our repair technicians cover all 922 towns and villages in Kent. Our nearest city page is London, about 43 miles away.
All of ME13 is covered. Close by, we cover Stalisfield Green (1 mile west), The Valley (1 mile north), Stocker's Head (2 miles south), Charing Hill (2 miles south) and Throwley Forstal (2 miles north-east). We also work in nearby towns such as Maidstone (12 miles west), Ashford (7 miles south), Canterbury (12 miles east), Sittingbourne (8 miles north-west), Whitstable (12 miles north-east) and Faversham (6 miles north-east).
What’s near Stalisfield
Our customers here include homes close to Church of St Mary, The Plough Inn and Spuckles and Kennelling Woods and the streets around them. For rail, the closest station is Charing station, roughly 2.5 miles south. Further afield, we also cover the area around Newnham Castle (3 miles north).
Stalisfield questions
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Do you work in Stalisfield?
We do. Technicians travel to Stalisfield from across the region, and the price is the same as everywhere else.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Stalisfield clients choose us
- Free fixed quotes from pictures
- Colour-matched on site
- No extra charge for your area
- Work done at your home or business
Read our full price list or bath cost comparison.
Towns and villages near Stalisfield
What else we do in Stalisfield
Aftercare tips
Simple care helps the repair last. Our advice:
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- How many items we do on one visit
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
When to call us in Stalisfield
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted:
- Brown or grey marks that do not clean off
- Wear marks under the taps
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
What your quote should include
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- How soon you can use it again
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
