Wakefield · England
Bath re-enamelling & resurfacing in Eastmoor, Wakefield
Our repair technicians come to Eastmoor for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coloured bath you want in white
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Wash away dyes and oils after use
- Repair dripping taps early
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Bath re-enamelling in Eastmoor without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on cast iron baths, acrylic baths and Victorian roll-tops, and people most often call us about enamel that’s lost its shine and feels rough and wear marks under the taps.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Eastmoor (WF1, WF3)
- Area hub
- Wakefield
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Eastmoor and the surrounding area
Eastmoor is about 1 mile east of Wakefield, in Wakefield. Our repair technicians come to customers in Eastmoor and the surrounding area, so nothing has to leave your home. Eastmoor is one of 101 places in Wakefield where we work. Our jobs stretch from Eastmoor to Leeds (about 9 miles away).
Our technicians cover all of WF1 and WF3 and the streets around it. Streets in the area include Ivy Lane, Linton Road and Barden Road, and we cover them all. Main roads around Eastmoor include the A6194, which makes travel easy. If you’re just outside Eastmoor, we cover Wakefield (1 mile west), Kirkthorpe (1 mile east), Horse Race End (1 mile south-east), Goosehill (2 miles east) and Agbrigg (2 miles south). We also work in nearby towns such as Castleford (6 miles north-east), Pontefract (7 miles east), Ossett (4 miles west), Normanton (3 miles east), South Kirkby and Moorthorpe (10 miles south-east) and South Elmsall (10 miles south-east).
What’s near Eastmoor
Our clients here include homes close to Wakefield City Academy, Outwood Academy City Fields and Outwood Primary Academy Park Hill. Also close by are The Rocking Horse pub (under half a mile south-east), Thornes Park (1.5 miles south-west) and Church of St Faith (under half a mile north-west). The closest station to Eastmoor is Wakefield Kirkgate station, roughly 0.6 miles south-west. Further afield, we also cover the area around West Riding Pauper Lunatic Asylum (0.5 miles north-west) and Trinity Walk (0.6 miles west). Green spaces nearby include Calder Park Wetlands Nature Reserve and Lemonroyd Lake.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why us?
- Same prices wherever you are
- A fixed quote before booking
- Nothing taken out or refitted
- Every repair guaranteed for a year
See our pricing and guide to resurfacing and replacement costs.
Towns and villages near Eastmoor
What else we do in Eastmoor
Landlords, agents and businesses in Eastmoor
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
When a repair is not the answer
In fairness, some problems need a different fix:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Common questions in Eastmoor
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you cover the entire of Wakefield?
We work UK-wide, and that includes Eastmoor. Our prices are the same everywhere.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
What affects the price in Eastmoor
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether we combine several jobs
- How many areas need work
- Unusual colours or finishes
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A wider photo showing the entire bath
- What it’s made of, if you know
- Something in shot to show the size
- One sharp close-up of the damage
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Clear the area around the damage
- Tell us about parking, stairs or access
- Open a window if you can
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
