Wakefield · England

Bath and surface repairs in WF1

Bath, tray, sink and worktop repairs across WF1, covering Eastmoor, Outwood and Kirkthorpe. Free, fixed quotes from your photos and a one-year guarantee.

Need a repair in WF1?

Bath repair across WF1: what to expect

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, generally in a single visit. Typical jobs include cracks in an acrylic bath and scuffs and scratches in the surface, on whirlpool & spa baths, acrylic and roll-top & freestanding.

Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow a morning or an afternoon.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Prices in WF1

Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

What you get with us

  • Work done at your home or business
  • Normally one visit, start to finish
  • Everything repaired in place
  • Rooms protected and left tidy

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Near you in Eastmoor

Our customers here include homes close to Wakefield City Academy, Outwood Academy City Fields and Outwood Primary Academy Park Hill, among other places. Other local landmarks include The Rocking Horse pub (under half a mile south-east), Thornes Park (1.5 miles south-west) and Church of St Faith (less than half a mile north-west). The closest station to Eastmoor is Wakefield Kirkgate station, roughly 0.6 miles south-west. Nearby you will also find West Riding Pauper Lunatic Asylum (0.5 miles north-west) and Trinity Walk (0.6 miles west). Green spaces nearby include Calder Park Wetlands Nature Reserve and Lemonroyd Lake.

Signs you need bath repair

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.

Contact us if you’ve noticed:

  • Rusty patches near the plughole
  • Scratches you can feel with a fingernail
  • Snagging damage from a refit
  • Damage beneath the taps

How we price bath repair

Repairs from £95. Prices are worked out job by job. The main factors are:

  • How much damage there is
  • The material
  • How many items we do on one visit
  • What kind of damage it is

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A close-up of the damage, in focus
  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Different materials, different repairs

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

How to look after the repair

To keep it looking its best for years:

  • Stick to mild cleaners and a soft cloth
  • Store metal items away from the bath
  • Don’t scrub with anything abrasive
  • Rinse the bath after use, especially in hard water areas

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

FAQs for WF1

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you redo an old repair?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Are there extra charges for WF1?

No. Our quotes include travel, and we charge the same wherever you are.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.