Norfolk · England
Bath Re-enamelling in Eccles Road
Our repair technicians come to Eccles Road for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
Signs you need bath re-enamelling in Eccles Road
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
People typically call us when they notice one of these:
- Staining under the taps and around the waste
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Wear marks under the taps
What your quote should include
- The length of the guarantee and what it covers
- How soon you can use it again
- Whether there are any call-out or travel charges
- How the room is protected while they work
Bath re-enamelling in Eccles Road without replacing anything
We do not move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the next day. Typical jobs include a bath that stays dull however much you clean it and a roll-top that’s seen better days, across pressed steel baths, basins & shower trays and cast iron baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Eccles Road (NR16)
- Region
- Norfolk
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Eccles Road
Other services in Eccles Road
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
How the visit works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
How to get a price
To get a price, send a couple of photos using our quote form or call us. We will say right away if a repair is the right fix.
Advice
Eccles Road and the surrounding area
Eccles Road is about 3 miles south-west of Attleborough, in Norfolk. Wherever you are in the NR16 postcode area, a technician comes to you. Eccles Road is one of 797 towns and villages in Norfolk we cover.
Our technicians cover all of NR16 and the streets around it. Jobs here include addresses on Station Road, Gallows Lane and Wilby Road. We also cover the places around Eccles Road: Eccles (1 mile south), Snetterton Heath (1 mile west), Wilby (1 mile south-east), Quidenham (1 mile south) and Snetterton (2 miles north-west). Within a short drive, we also cover Thetford (10 miles west), Dereham (14 miles north), Wymondham (10 miles north-east), Attleborough (3 miles north-east), Watton (9 miles north-west) and Hethersett (13 miles north-east).
Around Eccles Road
We visit homes around Church of St Mary and the streets around them. Eccles Road has its own railway station: Eccles Road station. Further afield, we also cover the area around Bickley Day Hospital (3.8 miles north-east) and Old Buckenham Castle (3.6 miles north-east).
Honest limits
Before booking, it’s worth knowing the limits:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Repairing versus replacing in Eccles Road
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- Nothing taken out or refitted
- A year’s guarantee on all work
Take a look at our prices page or bath cost comparison.
Common questions in Eccles Road
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Do you come to Eccles Road?
Yes, we do. Repair technicians travel to Eccles Road from across the region, with no extra charge for travel.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
What happens after I send photos?
We come back with a fixed quote, typically with dates to choose from. There is no obligation to book.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Landlords, letting agents and housing providers in Eccles Road use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Have chips seen to early
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
