Norfolk · England
Bath Re-enamelling for Snetterton Heath homes
Full bath re-enamelling and resurfacing at your home in Snetterton Heath, with a one-year guarantee on every repair.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Landlord and trade work in Snetterton Heath
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Bath re-enamelling in Snetterton Heath, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on acrylic baths, Victorian roll-tops and cast iron baths, and people most often call us about lots of chips and rust spots and brown or grey marks that don’t clean off.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Snetterton Heath (NR16)
- County
- Norfolk
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Snetterton Heath
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Which areas do you work in?
We work UK-wide, and that includes Snetterton Heath. Prices do not change with location.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
When to call us in Snetterton Heath
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- Chips and rust in more than one place
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- Whether a trained technician does the job
- What prep work is covered
Snetterton Heath and the surrounding area
Snetterton Heath is about 4 miles south-west of Attleborough, in Norfolk. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our technicians cover 797 places in Norfolk.
Our repair technicians cover all of the NR16 postcode area. That includes homes on Raceway Road and Harling Road and the roads around them. Nearby, we also work in Eccles Road (1 mile east), Snetterton (1 mile north-west), Eccles (1 mile south-east), Wilby (1 mile south-east) and Larling (2 miles west). Further out, we also cover Thetford (9 miles south-west), Dereham (14 miles north), Wymondham (10 miles north-east), Attleborough (4 miles north-east), Watton (8 miles north-west) and Hethersett (13 miles north-east).
Landmarks near Snetterton Heath
Around Snetterton Heath, we work in homes near Church of All Saints, among other places. For rail, the closest station is Eccles Road station, roughly 0.7 miles east. Nearby you will also find Old Buckenham Castle (4.2 miles east) and Banham International Motor Museum (3.5 miles south-east).
What we can’t put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Holes rusted through the metal
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Snetterton Heath
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
How it works
We agree an arrival time beforehand. On site, it takes a full day for most jobs. The room is left tidy and ready to use once it has cured.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
How to get a price
Email us pictures of the damage and a wider shot of the entire item, with your NR16 postcode, and we will reply with a fixed price.
Advice
How we price bath re-enamelling
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- The material and finish
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from pictures alone. To make it quick:
- Any details about the material
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A picture taken from further back
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Also near Snetterton Heath
Other services in Snetterton Heath
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You’ll see the full price before you book.
Why us?
- No extra charge for your area
- Typically one visit, start to finish
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
Read our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
