Bradford · England
Bath re-enamelling & resurfacing in Eccleshill, Bradford
Bath re-enamelling for Eccleshill, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off
About our bath re-enamelling in Eccleshill
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with stains that won’t shift and an outdated colour you’d like to change, we can typically put it right, on basins & shower trays, pressed steel baths and acrylic baths alike.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Eccleshill (BD2, BD10, BD18)
- County
- Bradford
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We take into account:
- How many areas need work
- Access to the area
- Whether it’s a chip, crack, burn or wear
- The material and finish
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Whether it’s been repaired or coated before
- What it’s made of, if you know
For a price in Eccleshill, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Aftercare tips
To keep it looking its best for years:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Places near Eccleshill
More services for Eccleshill
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Honest advice, even when it means no job
- Most jobs done in one visit
- CHAS and Constructionline accredited
- A year’s guarantee on all work
Read our prices page and resurfacing vs replacement cost guide.
FAQs for Eccleshill
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so let us know about it.
Do you cover Eccleshill?
Yes. We cover the whole UK and come to Eccleshill. Send us photos for a fixed quote, or call 0345 017 0787.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Which areas do you work in?
The entire UK, including all of Bradford. Just include your postcode and we’ll offer you dates.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Common problems we fix in Eccleshill
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Common reasons people in Eccleshill contact us include:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
Questions to ask before you book
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- How long it needs to cure
- What preparation is included
How it works
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a full day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Open a window if you can
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
Landlords, agents and businesses in Eccleshill
We regularly work with letting and managing agents. Send the address, photos and access details.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Honest limits
In fairness, there are a few things a repair will not fix:
- Steel that has corroded right through
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Eccleshill and the surrounding area
Eccleshill is about 2 miles east of Shipley, in Bradford. Anywhere in BD2, we come to you. Eccleshill is one of 140 towns and villages in Bradford we cover. You can also see our page for Leeds, about 8 miles away.
We cover every part of the BD2, BD10 and BD18 postcode area and the streets around it. That includes homes on Acre Lane, Wrose Road and Clara Road. With the A6176 close by, Eccleshill is simple for us to get to. We also travel to Bolton Outlanes (1 mile south), Wrose (1 mile north-west), Bolton (1 mile south), Bolton Woods (1 mile west) and Greengates (1 mile north-east). We also work in nearby towns such as Keighley (8 miles west), Bingley (4 miles north-west), Great Horton (4 miles south-west), Upper Green (4 miles south-west), Wibsey (4 miles south) and Ilkley (8 miles north-west).
What’s near Eccleshill
Locally, our jobs take us to homes close to Feversham College, Peel Park and Hanson School, among other places. Also close by are Blakehill Primary School (within half a mile north), Saint Cuthbert's (less than half a mile west) and The Lane Ends pub (within half a mile south-east). The closest station to Eccleshill is Frizinghall station, about 1.3 miles west of the centre. Other landmarks nearby include World of Sooty (1.3 miles north-west) and Westfield Bradford (2.1 miles south). Not far away are Heaton Reservoir Nature Reserve and Idle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
