Bradford · England
Bath Re-enamelling in Wrose
Full bath re-enamelling and resurfacing in Wrose, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Wear marks under the taps
For landlords and businesses
If you manage property in Wrose, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Bath re-enamelling at your home in Wrose
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. We’re frequently asked to fix a coloured bath you want in white and thin, worn enamel in places, in basins & shower trays, pressed steel baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Wrose (BD18, BD2, BD10)
- County
- Bradford
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Wrose
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Most people contact us after spotting something like this:
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
- An old resurfacing that’s failing
- A dull, rough surface that will not come clean
Comparing quotes
- How the colour is matched
- Whether the price covers travel
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Wrose. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Colour mixed on the day to match
- Honest advice, even when it means no job
- A year’s guarantee on all work
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before booking. We look at:
- Where the damage is and how we get to it
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How many areas need work
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A clear, close picture of the problem area
- Any earlier repairs or coatings
To get a price, send two or three photos using our quote form or ring us. We will say immediately whether it can be repaired.
Aftercare tips
It’s all simple stuff:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
How to get a price
If you’re in Wrose and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Your questions about bath re-enamelling in Wrose
How much does bath re-enamelling cost in Wrose?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the entire item with your BD18 postcode.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Which areas do you work in?
All of Bradford, and the rest of the UK. There is no extra charge for travel.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you work in Wrose?
We do. Repair technicians travel to Wrose from across the region, and the price is the same as everywhere else.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Covering Wrose
Wrose is about 1 mile east of Shipley, in Bradford. Clients in Wrose get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover all 140 towns and villages across Bradford. We work right across the region, from Wrose to Leeds (about 8 miles away).
All of BD18, BD2 and BD10 is within our area. Whether you live on Wrose Road, Clara Road and Snowden Road or a nearby road, we can come to you. Other places close to Wrose include Windhill (1 mile north-west), Eccleshill (1 mile south-east), Bolton Woods (1 mile south-west), Frizinghall (1 mile south-west) and Shipley (1 mile west). Within a short drive, we also cover Keighley (7 miles west), Bingley (4 miles north-west), Great Horton (4 miles south), Upper Green (4 miles south-west), Wibsey (4 miles south) and Ilkley (7 miles north).
Local landmarks in Wrose
Around Wrose, we work in homes near Saint Cuthbert's, Low Ash Primary School and Lister Park, among other places. Also close by are St. Joseph's Catholic College (1.2 miles south-west), Hanson School (0.8 miles south-east) and The Lane Ends pub (0.7 miles south-east). For rail, the closest station is Frizinghall station, roughly 0.9 miles south-west of the centre. Nearby you will also find World of Sooty (0.7 miles north-west) and Kirkgate Shopping Centre (2.3 miles south). For a walk, there is Idle Hill and Heaton Reservoir Nature Reserve.
Places near Wrose
What else we do in Wrose
About our accreditations · Every repair comes with a one-year guarantee.
