Barnsley · England
Bath Re-enamelling for Edderthorpe homes
We travel to Edderthorpe for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
About our bath re-enamelling in Edderthorpe
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s stains that won’t shift and a bath that stays dull however much you clean it, we can normally put it right, on pressed steel baths, acrylic baths and cast iron baths alike.
Every repair comes with our one-year guarantee.
- Where
- Edderthorpe (S71)
- Area hub
- Barnsley
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a full day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Don’t use the bath until it has fully cured
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Your questions about bath re-enamelling in Edderthorpe
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your S71 postcode.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we will ask for another angle.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Landlord and trade work in Edderthorpe
We work for landlords, letting agents and housing providers in Edderthorpe as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Covering Edderthorpe
Edderthorpe is about 2 miles north-east of Wombwell, in Barnsley. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Edderthorpe is one of 94 towns and villages in Barnsley where we work. We work right across the region, from Edderthorpe to Leeds (19 miles away).
We work across S71. From Edderthorpe Lane and Priest Croft Lane or anywhere nearby, we can come to you. Close by, we cover Darfield (1 mile south), Little Houghton (1 mile east), Millhouses (1 mile south-east), Middlecliffe (1 mile east) and Great Houghton (1 mile east). Further out, we also cover Barnsley (4 miles west), Wath upon Dearne (3 miles south), Shaw Lands (4 miles west), Hoyland (4 miles south-west), Worsbrough (4 miles west) and Wilthorpe (5 miles west).
Local landmarks in Edderthorpe
Our customers here include homes close to Darfield Upperwood Academy, Darfield Foulstone School of Creative Arts and Darfield Upperwood Academy, among other places. For rail, the closest station is Wombwell station, about 2.5 miles south-west. Further afield, we also cover the area around Kendray Hospital (3.1 miles west).
Signs you need bath re-enamelling in Edderthorpe
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Common reasons people in Edderthorpe contact us include:
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
- An outdated colour you’d like to change
What your quote should include
- What happens if the damage is worse than the pictures show
- Who turns up on the day
- Whether the price covers travel
- How long the guarantee is and what it covers
What affects the price in Edderthorpe
Prices start from £350. There is no area surcharge for Edderthorpe. The price reflects:
- The material
- Access to the area
- Any earlier repairs that need removing first
- Unusual colours or finishes
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- A close-up of the damage, in focus
- Any details about the material
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Also near Edderthorpe
Other services in Edderthorpe
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Same prices wherever you are
- Colour mixed on the day to match
- Everything repaired in place
- Work done at your home or business
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
