Somerset · England

Bath Re-enamelling for Edgarley homes

Local bath re-enamelling for Edgarley: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Wear marks under the taps
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Edgarley

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Bath re-enamelling in Edgarley without replacing anything

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We’re frequently asked to fix a coloured bath you want in white and wear marks under the taps, in pressed steel baths, Victorian roll-tops and cast iron baths.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.

Technician in a mask working on a freestanding roll-top bath
Area
Edgarley (BA6)
Area hub
Somerset
Cover
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

The process

There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day, including clearing up.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Ensure the area is dry

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.

Get a free quote

Advice

Where we work around Edgarley

Edgarley is about 5 miles south of Wells, in Somerset. We visit homes and businesses in Edgarley and nearby villages, so nothing has to leave your home. Edgarley is one of 640 towns and villages in Somerset we cover.

Jobs in BA6 are booked in the same way as anywhere else. Jobs here include addresses on Edgarley Road and Cinnamon Lane and the roads around them. Close by, we cover Havyatt (1 mile east), Woodlands (1 mile east), Brindham (1 mile north), East Street (1 mile east) and West Pennard (2 miles east). Within a short drive, we also cover Bridgwater (14 miles west), Yeovil (13 miles south), Burnham-on-Sea (15 miles north-west), Wells (5 miles north), Midsomer Norton (13 miles north-east) and Shepton Mallet (7 miles north-east).

Landmarks near Edgarley

Around Edgarley, we work in homes near St Andrew's Church and St Dunstan's Community School and the streets around them. Other landmarks nearby include Glastonbury Lake Village Museum (1.4 miles north-west) and Clarks Village (2.5 miles west). Open spaces near Edgarley include Ham Wall and Glastonbury Tor.

Map of Edgarley © OpenStreetMap contributors

When we would advise against a repair

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Leaking taps or wastes (a plumber’s job)
  • A cast iron or steel bath that’s cracked right through
  • Anything hidden under an old coating, until we remove it

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths

Materials and what they mean for the repair

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Landlord and trade work in Edgarley

We work for landlords, letting agents and housing providers in Edgarley as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Keep toiletries on a shelf rather than in the bath
  • A quick wipe after use keeps limescale away
  • Fix dripping taps quickly
  • Rinse off hair dye, oils and bath bombs immediately

Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

How we price bath re-enamelling

Prices start from £350. There are no hourly rates or hidden extras. The price is based on:

  • The colour and finish to match
  • How many areas need work
  • Doing more than one item at once
  • What kind of damage it is

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.

Quotes from your pictures

We price nearly every job from pictures. This is what we need:

  • Details of any past repairs
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • One picture of the entire bath

Most customers in Edgarley get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

What we are called out for in Edgarley

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

Send us a photo if you notice any of these:

  • A coating lifting around the plughole
  • Worn patches where water runs and sits
  • Enamel that is lost its shine and feels rough
  • A coloured bath you want in white

Questions to ask before booking

  • How the room is protected while they work
  • Whether a trained technician does the job
  • What happens if the damage is worse than the pictures show
  • What preparation is included

Our hiring checklist

FAQs for Edgarley

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

How quickly can you book me in?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Do you work for landlords and businesses?

Yes, frequently. We can quote for several properties together and work between tenancies.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.